CY24271ZXC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2003 |
| Series | Rambus®, XDR™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Clock Generator, Fanout Distribution |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Voltage - Supply | 2.375V~2.625V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY24271 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 2.5V |
| Supply Voltage-Max (Vsup) | 2.625V |
| Supply Voltage-Min (Vsup) | 2.375V |
| Number of Circuits | 1 |
| Nominal Supply Current | 130mA |
| Frequency (Max) | 1.067MHz |
| Output Characteristics | OPEN-DRAIN |
| Input | Clock |
| Ratio - Input:Output | 1:4 |
| PLL | Yes with Bypass |
| Differential - Input:Output | Yes/Yes |
| Divider/Multiplier | No/Yes |
| Length | 9.7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY24271ZXC Overview
As a clock IC, it is packaged by the Tube method. Clock PLL is embedded in the 28-TSSOP (0.173, 4.40mm Width) package. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. In it, there are 28 terminations to be found. Basically, a voltage of 2.5V should be applied to this electronic frequency generator. Clock is designed for clock generator's input. For a full understanding of the electronic part's performance, 1 circuits are implemented. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 1.067MHz. With the Surface Mount, it is easy to install this electric component on the panel. The maximal supply voltage (Vsup) reaches 2.625V. A maximum voltage of 2.375V should be used for this frequency generator for safety reasons. As long as there are 2.375V~2.625V supply voltages provided, clock generator ic should work. Test statistics estimate a temperature of 0°C~70°C, which should be set as the ambient temperature. This is an electronic part that can be classified as a Clock Generator, Fanout Distribution in this case. Clock PLL is equipped with 28 pin count. It is possible to find its related electronic parts by searching for the base part number CY24271. There is a 28 pin that is available on the digital clock generator. Supply voltage 2.5V is what time clock generator can handle. Rambus?, XDR? series electronic parts are included in this product. 4 signal outputs enable clock PLL to magnify output frequency as high as possible.
CY24271ZXC Features
Available in the 28-TSSOP (0.173, 4.40mm Width)
Supply voltage of 2.5V
Operating supply voltage of 2.5V
CY24271ZXC Applications
There are a lot of Cypress Semiconductor Corp CY24271ZXC Clock Generators applications.
- Antenna automatic tracking
- High-frequency induction heating
- Signal analyzer
- Frequency Modulation (FM) stereo decoders
- Coherent carrier tracking
- 1 Gigabit Ethernet
- Navigation, positioning and surveillance system for aircraft, ships and ships
- Electronic countermeasures
- Frequency synthesis
- Bit synchronization
