CY24293ZXCT
| Parameters | |
|---|---|
| Base Part Number | CY24293 |
| Output | HCSL, LVDS |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Number of Circuits | 1 |
| Quiescent Current | 60mA |
| Frequency (Max) | 200MHz |
| Input | Clock, Crystal |
| Ratio - Input:Output | 1:3 |
| Primary Clock/Crystal Frequency-Nom | 25MHz |
| PLL | Yes |
| Differential - Input:Output | No/Yes |
| Divider/Multiplier | No/No |
| Duty Cycle | 50 % |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Clock Generator, Fanout Distribution |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Clock Generators |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 25MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
CY24293ZXCT Overview
The Tape & Reel (TR) method is used for packaging clock ICs. This clock generator is embedded in the 16-TSSOP (0.173, 4.40mm Width) package. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. As you can see, it consists of 16 terminations. The supply voltage of 3.3V allows for high efficiency. The input of this clock generator is designed to be Clock, Crystal. A total of 1 circuits are implemented to access the full performance of the electrical part. Providing a maximum frequency of 200MHz, this clock-based RF synthesizer is suitable for a variety of applications. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. This clock PLL works with a supply voltage of 3V~3.6V. Using the test statistics, we estimate that the ambient temperature should be 0°C~70°C. The frequency synthesizer in this product is compatible with all levels of HCSL, LVDS logic. This electronic component can be classified as a Clock Generator, Fanout Distribution. There is a 16-bit clock-generating IC built specifically for microprocessors in this frequency generator. This part number CY24293 is related to the following electrical components. There are 16 pins on the frequency generator that are available for use. In terms of the supply voltage, PLL clock can handle 3.3V volts. As a result, it is commonly classified as a type of Clock Generators clock PLL. 2 signal outputs are provided for enhancing output frequency as much as possible. When operated at 25MHz, frequency synthesizer achieves high efficiency.
CY24293ZXCT Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY24293ZXCT Applications
There are a lot of Cypress Semiconductor Corp CY24293ZXCT Clock Generators applications.
- Frequency Modulation (FM) stereo decoders
- Time to digital converters
- PCI express cards
- Radiotelephones
- Automatic control
- Digital circuits
- Microwave backhaul IF
- Myriad digital applications
- Digital HDTV systems
- Mixed mode (analog and digital) applications
