Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Gold, Tin |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2008 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
Clock Generator, Fanout Distribution |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Clock Generators |
Technology |
CMOS |
Voltage - Supply |
3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Frequency |
25MHz |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
CY24293 |
Output |
HCSL, LVDS |
Pin Count |
16 |
Number of Outputs |
2 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
3.3V |
Number of Circuits |
1 |
Quiescent Current |
60mA |
Frequency (Max) |
200MHz |
Input |
Clock, Crystal |
Ratio - Input:Output |
1:3 |
Primary Clock/Crystal Frequency-Nom |
25MHz |
PLL |
Yes |
Differential - Input:Output |
No/Yes |
Divider/Multiplier |
No/No |
Duty Cycle |
50 % |
Length |
5mm |
Width |
4.4mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CY24293ZXIT Overview
This clock IC is packaged using the Tape & Reel (TR) method. A Clock PLL is included with the 16-TSSOP (0.173, 4.40mm Width) package. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. There are a total of 16 terminations in this file. To operate this time clock generator, 3.3V voltage should be applied. There is a Clock PLL called Clock, Crystal which is designed to be the input to this clock generator. There are 1 circuits implemented in order to achieve full performance from this electronic part. It provides a maximum frequency of 200MHz. The Surface Mount allows this electrical component to be easily installed on the panel. As long as there are 3V~3.6V supply voltages provided, clock generator ic should work. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. The frequency synthesizer in this product is compatible with all levels of HCSL, LVDS logic. This electronic component is usually classified as a Clock Generator, Fanout Distribution component. It is a 16-bit IC that is designed for microprocessors specifically. Related electrical parts can be found for the base part number CY24293. There is a 16 pin that is available on the digital clock generator. RF synthesizers can handle a voltage of 3.3V as the supply voltage. And basically, this clock generator is often classified as a kind of Clock Generators. The output frequency is magnified as high as possible with 2 signal outputs. At a frequency of 25MHz, the system can achieve high efficiency.
CY24293ZXIT Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY24293ZXIT Applications
There are a lot of Cypress Semiconductor Corp CY24293ZXIT Clock Generators applications.
- Radar
- 10 Gigabit Ethernet
- Skew suppression
- Precision auxiliary angle deflection measurement
- Antenna automatic tracking
- FPGA and processor clocks
- Quenching?
- Signal demodulation
- Tracking filters
- High-speed communication applications