CY24488ZXC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Clock Generator, Fanout Distribution |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Clock Generators |
| Voltage - Supply | 2.5V 3.3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY24488 |
| Output | CMOS |
| Pin Count | 16 |
| Number of Outputs | 5 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 4 |
| Number of Circuits | 1 |
| Nominal Supply Current | 60mA |
| Frequency (Max) | 148.5MHz |
| Input | CMOS, Crystal |
| Ratio - Input:Output | 1:5 |
| Primary Clock/Crystal Frequency-Nom | 27MHz |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/No |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY24488ZXC Overview
It is packaged using the Tube method since it is a clock IC. A Clock PLL is included with the 16-TSSOP (0.173, 4.40mm Width) package. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. There are a total of 16 terminations in this file. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. CMOS, Crystal is designed as this clock generator's input. To access the full performance of the electronic component, 1 circuits are implemented. RF synthesizers based on this clock provide frequencies up to 148.5MHz maximum. The Surface Mount allows the electrical component to be installed conveniently on the panel. As far as the supply voltage is concerned, clock PLL can be used with 2.5V 3.3V. Based on the test statistics, an ambient temperature of 0°C~70°C should be set. As the name suggests, this is a clock generator that is compatible with CMOS logic levels. This electronic component can be classified into Clock Generator, Fanout Distribution. Microprocessors are specifically designed to use this clock-generating IC, which has a 16-bit output. Related electrical parts can be found for the base part number CY24488. There is a 16 pin that is available on the frequency synthesizers. The supply voltage should be maintained at 3.3V for high efficiency. A Clock Generators clock generator is essentially what this device is. 5 signal outputs maximi5e the output frequency. An 8-element clock PLL with a low jitter performance is available on this page.
CY24488ZXC Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY24488ZXC Applications
There are a lot of Cypress Semiconductor Corp CY24488ZXC Clock Generators applications.
- Satellite receivers
- VSAT (Small Ground Satellite Station)
- Cellular/4G
- Integrated phase noise in aerospace systems
- Tracking filters
- Mechanical devices
- Microwave backhaul IF
- Small signal recovery
- Sampling clocks for ADC and DAC
- Automatic control
