CY25100ZXIF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Spread Spectrum Clock Generator |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Clock Generators |
| Voltage - Supply | 3.13V~3.45V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | CY25100 |
| Output | CMOS |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 3.3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 35mA |
| Frequency (Max) | 200MHz |
| Input | CMOS, Crystal |
| Ratio - Input:Output | 1:2 |
| Primary Clock/Crystal Frequency-Nom | 166MHz |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/No |
| Length | 4.4mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY25100ZXIF Overview
This clock IC is packaged using the Tray method. In the 8-TSSOP (0.173, 4.40mm Width) package, there is an embedded clock generator. When reflowed, this frequency generator can withstand a maximum temperature of 260. It contains 8 terminations that can be found in frequency synthesizer. The clock generator ic should be grounded with a voltage of 3.3V. In this clock generator, CMOS, Crystal is used as the input to the clock. 1 circuits are implemented to access the electronic component's full performance. It provides a maximum frequency of 200MHz. Surface Mount-slots make it easy to mount this electronic component on panels. In terms of supply voltage, RF synthesizer works with 3.13V~3.45V. By calculating the test statistics, -40°C~85°C is the appropriate ambient temperature. I would like to present to you a frequency synthesizer that is compatible with CMOS logic levels. It has been classified as a Fanout Buffer (Distribution), Spread Spectrum Clock Generator electronic part, which means that it is a semiconductor. This clock-generating IC is a 8-bit device designed explicitly for microprocessors. It is possible to find its related electronic parts by searching for the base part number CY25100. There are a number of 8 pins that are available on the frequency synthesizers. This time clock generator can handle a voltage of 3.3V as its supply voltage. The clock PLL is generally classified as a Clock Generators device. The frequency synthesizer features 2 signal outputs to ensure as high a frequency as possible.
CY25100ZXIF Features
Available in the 8-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY25100ZXIF Applications
There are a lot of Cypress Semiconductor Corp CY25100ZXIF Clock Generators applications.
- Coherent carrier tracking
- Mobile telephones
- Wireless infrastructure
- Frequency shifting decodes
- Small signal recovery
- Camera systems
- Frequency synthesis
- Smartphones
- Peripheral devices
- Vector network analyzers (VNA)
