CY2510ZXC-1
| Parameters | |
|---|---|
| Number of Outputs | 11 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Circuits | 1 |
| Nominal Supply Current | 200mA |
| Frequency (Max) | 140MHz |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 2:11 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1998 |
| Series | Spread Aware™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Clock Drivers |
| Voltage - Supply | 2.97V~3.63V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | CY2510 |
| Output | LVCMOS, LVTTL |
| Pin Count | 24 |
CY2510ZXC-1 Overview
This clock IC is packaged using the Tube method. 24-TSSOP (0.173, 4.40mm Width) contains this Clock PLL. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. As you can see, it consists of 24 terminations. The supply voltage of 3.3V allows for high efficiency. LVCMOS, LVTTL is designed for clock generator's input. Using 1 circuits, the electronic part's full performance can be accessed. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 140MHz. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. This clock generator would require a maximum supply voltage of 3.63V. The supply voltage for this frequency synthesizer should be kept above 2.97V for safety considerations. Clock generator ic works with 2.97V~3.63V. Test statistics suggest setting the ambient temperature at 0°C~70°C, which is 0°C~70°C. LVCMOS, LVTTL logic levels are supported by this RF synthesizer. This electronic component can be classified into Fanout Buffer (Distribution), Zero Delay Buffer. An IC that generates clocks specifically for microprocessors, this clock PLL is 24-bits in si24e. According to the base part number, its related parts can be founded. There are 24 pins that are available on the clock PLL. Time clock generator can handle a voltage of 3.3V as the supply voltage. In general, this clock PLL is considered a Clock Drivers device. There are a number of electronic parts in the Spread Aware? series, including this one. Clock PLL has 11 signal outputs to maximi11e output frequency.
CY2510ZXC-1 Features
Available in the 24-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2510ZXC-1 Applications
There are a lot of Cypress Semiconductor Corp CY2510ZXC-1 Clock Generators applications.
- Digital logic circuits
- Peripheral devices
- Smartphones
- CPUs
- Signal generator
- High-speed optical transport network (OTN)
- FM demodulation networks for FM operations
- Microwave point-to-point systems
- Vector network analyzers (VNA)
- Modems
