Parameters |
Input |
Clock, Crystal |
Ratio - Input:Output |
1:6 |
Primary Clock/Crystal Frequency-Nom |
166MHz |
PLL |
Yes with Bypass |
Differential - Input:Output |
No/No |
Divider/Multiplier |
Yes/No |
Duty Cycle |
50 % |
Height |
950μm |
Length |
5.1mm |
Width |
4.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Contact Plating |
Gold, Tin |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Published |
1998 |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
Fanout Buffer (Distribution), Spread Spectrum Clock Generator |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Clock Generators |
Technology |
CMOS |
Voltage - Supply |
2.375V~3.465V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
3.3V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
CY25200 |
Output |
VDDL |
Pin Count |
16 |
Number of Outputs |
6 |
Operating Supply Voltage |
3.3V |
Number of Circuits |
1 |
Nominal Supply Current |
33mA |
Power Dissipation |
350mW |
Max Supply Current |
33mA |
Frequency (Max) |
200MHz |
CY25200KFZXC Overview
As a clock IC, it is packaged by the Tube method. The 16-TSSOP (0.173, 4.40mm Width) package contains this clock generator. This clock generator ic can sustain 260 degrees of temperature during reflowing. There are 16 terminations found in this file. Clock generator ics require a voltage of 3.3V. As the Clock PLL's input, Clock, Crystal is designed to be used in order to generate the clock signal. For full access to the electronic component's capabilities, 1 circuits are implemented. RF synthesizers based on this clock provide frequencies up to 200MHz maximum. The Surface Mount allows this electrical component to be easily installed on the panel. As far as the supply voltage is concerned, clock PLL can be used with 2.375V~3.465V. Test statistics suggest setting the ambient temperature at 0°C~70°C, which is 0°C~70°C. The frequency synthesizer in this product is compatible with all levels of VDDL logic. An electrical part such as this one can be classified as a Fanout Buffer (Distribution), Spread Spectrum Clock Generator component. An IC that generates clocks specifically for microprocessors, this clock PLL is 16-bits in si16e. The related electronic parts of part number CY25200 are listed below. There are 16 pins that are available on the frequency generator. Clock PLL is capable of handling a voltage of 3.3V. This clock generator can be classified as a kind of Clock Generators in general. The frequency synthesizer features 6 signal outputs to ensure as high a frequency as possible. When this RF synthesizer is operated at its maximum current, it will supply 33mA.
CY25200KFZXC Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY25200KFZXC Applications
There are a lot of Cypress Semiconductor Corp CY25200KFZXC Clock Generators applications.
- Digital HDTV systems
- Medical equipment
- Digital logic circuits
- Media broadcast servers
- Laptops
- Set-top boxes
- Signal demodulation
- Time to digital converters
- Local oscillator source in receiver
- Camera systems