Parameters |
Published |
1998 |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
Fanout Buffer (Distribution), Spread Spectrum Clock Generator |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Clock Generators |
Technology |
CMOS |
Voltage - Supply |
2.375V~3.465V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
3.3V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
CY25200 |
Output |
VDDL |
Pin Count |
16 |
Number of Outputs |
6 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
3.3V |
Number of Circuits |
1 |
Nominal Supply Current |
33mA |
Power Dissipation |
350mW |
Frequency (Max) |
200MHz |
Input |
Clock, Crystal |
Ratio - Input:Output |
1:6 |
Primary Clock/Crystal Frequency-Nom |
166MHz |
PLL |
Yes with Bypass |
Differential - Input:Output |
No/No |
Divider/Multiplier |
Yes/No |
Length |
5mm |
Width |
4.4mm |
RoHS Status |
ROHS3 Compliant |
Factory Lead Time |
1 Week |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
0°C~70°C |
Packaging |
Tape & Reel (TR) |
CY25200KFZXCT Overview
As a clock IC, it is packaged by the Tape & Reel (TR) method. The 16-TSSOP (0.173, 4.40mm Width) package contains this clock generator. When reflowed, this frequency generator can withstand a maximum temperature of 260. In it, there are 16 terminations to be found. The supply voltage of 3.3V allows for high efficiency. Clock, Crystal is designed for clock generator's input. Using 1 circuits, the electronic part's full performance can be accessed. Providing a maximum frequency of 200MHz, this clock-based RF synthesizer is suitable for a variety of applications. The Surface Mount allows the electrical component to be installed conveniently on the panel. In terms of supply voltage, RF synthesizer works with 2.375V~3.465V. Based on the test statistics, an ambient temperature of 0°C~70°C should be set. As the name suggests, this is a clock generator that is compatible with VDDL logic levels. This is an electronic part that can be classified as a Fanout Buffer (Distribution), Spread Spectrum Clock Generator in this case. In this IC, a 16-bit frequency generator is designed specifically for use in microprocessors. This part number is related to its related electronic parts. PLL is designed with 16 pins. The supply voltage should be maintained at 3.3V for high efficiency. This clock generator can be classified as a kind of Clock Generators in general. The output frequency can be amplified as high as possible with its 6 signal outputs.
CY25200KFZXCT Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY25200KFZXCT Applications
There are a lot of Cypress Semiconductor Corp CY25200KFZXCT Clock Generators applications.
- Time to digital converters
- Televisions
- Deep space exploration
- Wireless base station for LTE, LTE-advanced
- FSK demodulators
- Simple clock clean-up circuits
- Motor speed controls
- PMR (Professional Mobile Radio)
- Signal frequency synthesis circuits
- Peripheral devices