banner_page

CY2546FC

1.8V Fanout Distribution, Fractional N Synthesizer, Multiplexer, Spread Spectrum Clock Generator 166MHz CY2546 Clock Generators 44 Pins 24-VFQFN Exposed Pad 24 Terminals Surface Mount 1.65V~1.95V Tray


  • Manufacturer: Cypress Semiconductor Corp
  • Nocochips NO: 217-CY2546FC
  • Package: 24-VFQFN Exposed Pad
  • Datasheet: PDF
  • Stock: 590
  • Description: 1.8V Fanout Distribution, Fractional N Synthesizer, Multiplexer, Spread Spectrum Clock Generator 166MHz CY2546 Clock Generators 44 Pins 24-VFQFN Exposed Pad 24 Terminals Surface Mount 1.65V~1.95V Tray (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 24-VFQFN Exposed Pad
Number of Pins 24
Operating Temperature 0°C~70°C
Packaging Tray
Published 2006
JESD-609 Code e3
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 24
ECCN Code EAR99
Type Fanout Distribution, Fractional N Synthesizer, Multiplexer, Spread Spectrum Clock Generator
Terminal Finish Matte Tin (Sn)
Voltage - Supply 1.65V~1.95V
Terminal Position QUAD
Supply Voltage 1.8V
Terminal Pitch 0.5mm
Base Part Number CY2546
Output Clock
Pin Count 44
Operating Supply Voltage 1.8V
Number of Elements 4
Number of Circuits 1
Nominal Supply Current 15mA
Frequency (Max) 166MHz
Input LVCMOS, Crystal
Ratio - Input:Output 1:9
Primary Clock/Crystal Frequency-Nom 48MHz
PLL Yes with Bypass
Differential - Input:Output No/No
Divider/Multiplier Yes/No
Radiation Hardening No
RoHS Status ROHS3 Compliant

CY2546FC Overview


This clock IC is packaged using the Tray method. In the 24-VFQFN Exposed Pad package, there is an embedded clock generator. As you can see, it consists of 24 terminations. Basically, this time clock generator needs a voltage of 1.8V. In this clock generator, LVCMOS, Crystal is used as the input to the clock. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. This clock-based frequency generator provides a frequency up to 166MHz Max. With the Surface Mount, it is easy to install this electric component on the panel. As long as you provide 1.65V~1.95V supply voltage, it will work. Test statistics suggest setting the ambient temperature at 0°C~70°C, which is 0°C~70°C. Clock logic levels are supported by this RF synthesizer. As far as this electronic part is concerned, it can be classified as a Fanout Distribution, Fractional N Synthesizer, Multiplexer, Spread Spectrum Clock Generator component. There is a 44-bit clock-generating IC built specifically for microprocessors in this frequency generator. According to the base part number CY2546, its related parts can be found. It is possible to connect to the PLL via 24 pins. The supply voltage should be maintained at 1.8V for high efficiency. An efficient 4-element frequency generator with low jitter performance is being offered here.

CY2546FC Features


Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Operating supply voltage of 1.8V

CY2546FC Applications


There are a lot of Cypress Semiconductor Corp CY2546FC Clock Generators applications.

  • Phase modulation cellular systems
  • Clock synchronization
  • DVD recorders
  • Digital switching systems
  • High-frequency induction heating
  • Cable television converter boxes
  • Wireless base station for LTE, LTE-advanced
  • Broadcast communication
  • Wireless handsets
  • Pulsed digital systems

Write a review

Note: HTML is not translated!
    Bad           Good