CY25811ZXC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Clock/Frequency Synthesizer, Frequency Modulator, Spread Spectrum Clock Generator |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Voltage - Supply | 2.97V~3.63V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | CY25811 |
| Output | Clock |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Current-Max | 35mA |
| Frequency (Max) | 32MHz |
| Input | Clock, Crystal, Resonator |
| Ratio - Input:Output | 1:1 |
| Primary Clock/Crystal Frequency-Nom | 32MHz |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/Yes |
| Length | 4.4mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
CY25811ZXC Overview
Clock ICs are packaged using the Tube method. Clock PLL is embedded in the 8-TSSOP (0.173, 4.40mm Width) package. This clock generator ic can sustain a maximum temperature of 260 during reflowing. 8 terminations can be found in frequency synthesizer. This clock generator ic should receive a voltage of 3.3V. A clock generator's input is called Clock, Crystal, Resonator and it is designed as the input for this clock generator. A clock-based RF synthesizer that provides a max frequency of 32MHz is available. Because of the Surface Mount, clock PLL can be easily mounted on the panel. In terms of supply voltage, RF synthesizer works with 2.97V~3.63V. Test statistics suggest setting the ambient temperature at 0°C~70°C, which is 0°C~70°C. It's compatible with Clock logic levels. This electronic component can be classified into Clock/Frequency Synthesizer, Frequency Modulator, Spread Spectrum Clock Generator. In particular, this clock PLL is designed to be used with microprocessors. This part number is related to its related electronic parts. There are 8 pins that are available on the frequency generator. There is a maximum supply voltage of 3.3V that electronic frequency generator can handle. 1 signal outputs allow for maximi1ation of output frequency. It is possible for an element to be destroyed by thermal damage if the supply current is too high (above 35mA)
CY25811ZXC Features
Available in the 8-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY25811ZXC Applications
There are a lot of Cypress Semiconductor Corp CY25811ZXC Clock Generators applications.
- Digital HDTV systems
- Clock recovery
- Bluetooth transmitters
- Microwave radio
- 10 Gigabit Ethernet
- Infotainment systems
- Clock synchronization
- Pagers
- Notebooks
- HDD recorders
