CY25812ZXC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Clock/Frequency Synthesizer, Frequency Modulator, Spread Spectrum Clock Generator |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Voltage - Supply | 2.97V~3.63V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | CY25812 |
| Output | Clock |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 3.3V |
| Supply Current-Max | 35mA |
| Frequency (Max) | 64MHz |
| Input | Clock, Crystal, Resonator |
| Ratio - Input:Output | 1:1 |
| Primary Clock/Crystal Frequency-Nom | 32MHz |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/Yes |
| Length | 4.4mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY25812ZXC Overview
As a clock IC, it is packaged by the Tube method. There is a clock generator embedded in the 8-TSSOP (0.173, 4.40mm Width) package. This clock generator ic can sustain a maximum temperature of 260 during reflowing. 8 terminations can be found in frequency generators. A voltage of 3.3V should be applied to this electronic frequency generator. This clock generator receives its inputs from Clock, Crystal, Resonator, which is designed to be the clock source. This clock-based frequency generator provides a frequency up to 64MHz Max. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. Clock generator ic works with 2.97V~3.63V. Test statistics estimate a temperature of 0°C~70°C, which should be set as the ambient temperature. The frequency synthesizer in this product is compatible with all levels of Clock logic. It has been classified as a Clock/Frequency Synthesizer, Frequency Modulator, Spread Spectrum Clock Generator electronic part, which means that it is a semiconductor. Clock PLL is equipped with 8 pin count. These related electrical parts are available for the base part number CY25812. Clock generator is designed with 8 pins. There is a maximum supply voltage of 3.3V that clock generator can handle. The output frequency is magnified as high as possible with 1 signal outputs. Elements can be destroyed by excessive supply current (greater than 35mA).
CY25812ZXC Features
Available in the 8-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY25812ZXC Applications
There are a lot of Cypress Semiconductor Corp CY25812ZXC Clock Generators applications.
- Space communucation
- Peripheral devices
- Radio receivers
- High-speed communication applications
- Set-top boxes
- Cellular/4G
- Digital logic circuits
- Cell phones
- Modems
- Clock recovery
