CY25823ZXC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Clock/Frequency Synthesizer, Fanout Distribution, Spread Spectrum Clock Generator |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Voltage - Supply | 3.135V~3.465V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY25823 |
| Output | Clock |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 3.3V |
| Number of Circuits | 1 |
| Max Supply Current | 50mA |
| Frequency (Max) | 100MHz |
| Input | LVTTL |
| Ratio - Input:Output | 1:2 |
| Primary Clock/Crystal Frequency-Nom | 14.131818MHz |
| PLL | Yes |
| Differential - Input:Output | No/Yes |
| Divider/Multiplier | Yes/No |
| Height | 1.094mm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY25823ZXC Overview
The Tube method is used for packaging clock ICs. The 16-TSSOP (0.173, 4.40mm Width) package embeds this Clock PLL. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. 16 terminations can be found in frequency generators. This time clock generator should be voltaged at 3.3V. As the Clock PLL's input, LVTTL is designed to be used in order to generate the clock signal. For full access to the electronic component's capabilities, 1 circuits are implemented. Providing a maximum frequency of 100MHz, this clock-based RF synthesizer is suitable for a variety of applications. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. Clock PLL works with 3.135V~3.465V supply voltage provided. Test statistics suggest setting the ambient temperature at 0°C~70°C, which is 0°C~70°C. Clock is designed for clock generator's output. As far as this electronic part is concerned, it can be classified as a Clock/Frequency Synthesizer, Fanout Distribution, Spread Spectrum Clock Generator component. It is a 16-bit clock PLL designed specifically for microprocessors. According to the base part number CY25823, its related parts can be found. There are 16 pins on the frequency generator that are available for use. RF synthesizers can handle a voltage of 3.3V as the supply voltage. 2 signal outputs enable clock PLL to magnify output frequency as high as possible. The maximal current supplied for this frequency synthesizer operation reaches 50mA.
CY25823ZXC Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY25823ZXC Applications
There are a lot of Cypress Semiconductor Corp CY25823ZXC Clock Generators applications.
- Frequency Modulation (FM) stereo decoders
- Clock recovery
- Multiplexing communication
- Infotainment systems
- Bit synchronization
- Main oscillator in receiver
- Medical equipment
- Phase modulation cellular systems
- High-speed communication applications
- PCI express cards
