CY26049ZXI-36
| Parameters | |
|---|---|
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2003 |
| Series | Failsafe™, PacketClock™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Clock/Frequency Synthesizer, Clock Generator, Fanout Distribution, Jitter Attenuator |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Voltage - Supply | 3.15V~3.45V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY26049 |
| Pin Count | 16 |
| Number of Outputs | 3 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 50mA |
| Frequency (Max) | 155MHz |
| Input | Clock |
| Ratio - Input:Output | 1:3 |
| Primary Clock/Crystal Frequency-Nom | 18.432MHz |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/No |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY26049ZXI-36 Overview
Clock generator is packaged in the way of Tube. As part of the 16-TSSOP (0.173, 4.40mm Width) package, this clock generator is embedded. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. As you can see, it consists of 16 terminations. The clock generator ic should be grounded with a voltage of 3.3V. It is designed that the Clock PLL's input should be Clock. Using 1 circuits, the electronic part's full performance can be accessed. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 155MHz. The Surface Mount allows this electrical component to be easily installed on the panel. In terms of supply voltage, RF synthesizer works with 3.15V~3.45V. Test statistics estimate a temperature of -40°C~85°C, which should be set as the ambient temperature. It is possible to classify this electronic component as a Clock/Frequency Synthesizer, Clock Generator, Fanout Distribution, Jitter Attenuator. It is a 16-bit clock PLL designed specifically for microprocessors. Related electrical parts can be found for the base part number CY26049. A 16 pin is available on the clock PLL. The supply voltage should be maintained at 3.3V for high efficiency. There is an electronic part in this series that belongs to the Failsafe?, PacketClock? family. 3 signal outputs are provided for enhancing output frequency as much as possible.
CY26049ZXI-36 Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY26049ZXI-36 Applications
There are a lot of Cypress Semiconductor Corp CY26049ZXI-36 Clock Generators applications.
- Melting
- Phase modulation cellular systems
- HDD recorders
- Line cards used in telephone exchange
- Modems
- Digital logic circuits
- VSAT (Small Ground Satellite Station)
- Wireless infrastructure
- Ports
- Televisions
