banner_page

CY26580OI-2

3.3V Clock Generator, Fanout Distribution, Multiplexer 133.33MHz CY26580 Clock Generators PacketClock? Series 20 Pins 20-SSOP (0.154, 3.90mm Width) 20 Terminals Surface Mount 3.14V~3.47V Tube


  • Manufacturer: Cypress Semiconductor Corp
  • Nocochips NO: 217-CY26580OI-2
  • Package: 20-SSOP (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 988
  • Description: 3.3V Clock Generator, Fanout Distribution, Multiplexer 133.33MHz CY26580 Clock Generators PacketClock? Series 20 Pins 20-SSOP (0.154, 3.90mm Width) 20 Terminals Surface Mount 3.14V~3.47V Tube (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SSOP (0.154, 3.90mm Width)
Number of Pins 20
Operating Temperature -40°C~85°C
Packaging Tube
Published 2003
Series PacketClock™
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 20
ECCN Code EAR99
Type Clock Generator, Fanout Distribution, Multiplexer
Voltage - Supply 3.14V~3.47V
Terminal Position DUAL
Terminal Form GULL WING
Supply Voltage 3.3V
Terminal Pitch 0.635mm
Reach Compliance Code unknown
Base Part Number CY26580
Output Clock
Pin Count 20
Qualification Status Not Qualified
Operating Supply Voltage 3.3V
Number of Circuits 1
Frequency (Max) 133.33MHz
Input CMOS
Ratio - Input:Output 1:2
Primary Clock/Crystal Frequency-Nom 125MHz
PLL Yes with Bypass
Differential - Input:Output No/No
Divider/Multiplier Yes/No
Length 8.6487mm
Width 3.8989mm
RoHS Status Non-RoHS Compliant

CY26580OI-2 Overview


As a clock IC, PLLs is packaged using the Tube method. The 20-SSOP (0.154, 3.90mm Width) package includes this clock generator. There are 20 terminations found in the file. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. This Clock PLL will be fed by CMOS as its input. For a full understanding of the electronic part's performance, 1 circuits are implemented. There is a maximum frequency of 133.33MHz Max with this clock-based frequency generator. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. As far as the supply voltage is concerned, clock PLL can be used with 3.14V~3.47V. Using the test statistics, it is estimated that the ambient temperature should be set to -40°C~85°C. Clock logic levels are supported by this RF synthesizer. It is possible to classify this electronic component as a Clock Generator, Fanout Distribution, Multiplexer. An IC that generates clocks specifically for microprocessors, this clock PLL is 20-bits in si20e. Related electrical parts can be found for the base part number CY26580. PLL is designed with 20 pins. In terms of the supply voltage, analog clock generator can handle 3.3V volts. It is part of the PacketClock? series of electronic components.

CY26580OI-2 Features


Available in the 20-SSOP (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CY26580OI-2 Applications


There are a lot of Cypress Semiconductor Corp CY26580OI-2 Clock Generators applications.

  • Radiotelephones
  • Integrated phase noise in aerospace systems
  • Broadcast communication
  • Automatic control
  • CPUs
  • Wireless infrastructure
  • Ports
  • Tracking filters
  • Modems
  • Quenching?

Write a review

Note: HTML is not translated!
    Bad           Good