CY28400OXC-2T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Weight | 50.008559mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Voltage - Supply | 3.135V~3.465V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CY28400 |
| Output | HCSL |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 92mA |
| Frequency (Max) | 100MHz |
| Input | Clock |
| Ratio - Input:Output | 1:4 |
| PLL | Yes |
| Differential - Input:Output | Yes/Yes |
| Propagation Delay (tpd) | 0.25 ns |
| Main Purpose | PCI Express (PCIe), SATA CPU |
| Same Edge Skew-Max (tskwd) | 0.05 ns |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| RoHS Status | RoHS Compliant |
CY28400OXC-2T Overview
There is a Tape & Reel (TR) package that contains it. There is a 28-SSOP (0.209, 5.30mm Width)-serial number on the packaging of this product that identifies it as being packaged in a case. There is a recommended mounting type of Surface Mount. In it, there are 28 terminations. 3.3V is the voltage provided by this part. NOT SPECIFIED runs using this part's peak reflow temperature. As of the moment, the device has 1. normaloperation has a frequency of 100MHz. Temperatures can be varied in the 0°C~70°C range. There is a possibility of the component supplying a voltage of 3.135V~3.465V. PCI Express (PCIe), SATA CPU is the main purpose of the component. Output HCSL is intended. There have been 2006 publications of this part. CY28400 is the base part number for you to search for other information. With Surface Mount, it is recommended that it be mounted. 28 pins are on the device. The board has 28 pins. You should maintain a voltage of 3.3V for the supply. In this device, 4 outputs can be maintained.
CY28400OXC-2T Features
Mounting Type: Surface Mount
Peak Reflow Temperature (Cel): NOT SPECIFIED
Include 1 Circuits
run the output at th range of HCSL
with 28 Pins
operate supply voltage at the range of 3.3V
CY28400OXC-2T Applications
There are a lot of Silicon Labs CY28400OXC-2T application specific timer?applications.
- Small Cells, Mobile Backhaul/Fronthaul
- 10/40/100G network line cards
- GbE/10 GbE/100 GbE Synchronous Ethernet (ITU-T G.8262)
- Network Attached Storage
- Servers
- Printers
- Wireless Access Point
- Residential gateways
- XO replacement
- Routers
