Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Gold, Tin |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Published |
1997 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Clock Generator, Fanout Distribution |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
CAN ALSO OPERATE AT 3.3 V SUPPLY |
Technology |
CMOS |
Voltage - Supply |
3V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
CY2907 |
Output |
Clock |
Pin Count |
8 |
Number of Outputs |
2 |
Operating Supply Voltage |
5V |
Number of Circuits |
1 |
Nominal Supply Current |
42mA |
Frequency (Max) |
130MHz |
Input |
Clock, Crystal |
Ratio - Input:Output |
1:2 |
Primary Clock/Crystal Frequency-Nom |
30MHz |
PLL |
Yes with Bypass |
Differential - Input:Output |
No/No |
Divider/Multiplier |
Yes/No |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CY2907FX8 Overview
Tube-method packaging is used for clock ICs. The 8-SOIC (0.154, 3.90mm Width) package contains this clock generator. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. As you can see, it consists of 8 terminations. Clock generator ics require a voltage of 5V. In this case, Clock, Crystal is designed to be the input of the clock generator. A total of 1 circuits are implemented to access the full performance of the electrical part. This clock-based frequency generator provides a frequency up to 130MHz Max. Thanks to the Surface Mount, this electric component can easily be installed on a panel. In terms of supply voltage, RF synthesizer works with 3V~5.5V. Based on the test statistics, an ambient temperature of 0°C~70°C should be set. The RF synthesizer is compatible with Clock logic levels. It is possible to classify this electronic component as a Clock Generator, Fanout Distribution. This clock-generating IC is a 8-bit device designed explicitly for microprocessors. The related electronic parts of part number CY2907 are listed below. There is an available 8 pin on the PLL. The supply voltage should be maintained at 5V for high efficiency. This clock PLL features CAN ALSO OPERATE AT 3.3 V SUPPLY for better clock signal output. The output frequency can be amplified as high as possible with its 2 signal outputs.
CY2907FX8 Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 5V
Operating supply voltage of 5V
CY2907FX8 Applications
There are a lot of Cypress Semiconductor Corp CY2907FX8 Clock Generators applications.
- Wide area power system
- Various decoding circuits
- Deep space exploration
- Bluetooth receivers
- DVD recorders
- Integrated phase noise in aerospace systems
- Radar
- Tracking filters
- Medical equipment
- Myriad digital applications