banner_page

CY29972AXIT

3.3V Fanout Distribution, Multiplexer, Spread Spectrum Clock Generator, Zero Delay Buffer 125MHz CY29972 Clock Generators 52 Pins 52-TQFP 52 Terminals Surface Mount 2.9V~3.6V Tape & Reel (TR)


  • Manufacturer: Cypress Semiconductor Corp
  • Nocochips NO: 217-CY29972AXIT
  • Package: 52-TQFP
  • Datasheet: PDF
  • Stock: 730
  • Description: 3.3V Fanout Distribution, Multiplexer, Spread Spectrum Clock Generator, Zero Delay Buffer 125MHz CY29972 Clock Generators 52 Pins 52-TQFP 52 Terminals Surface Mount 2.9V~3.6V Tape & Reel (TR) (Kg)

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case 52-TQFP
Surface Mount YES
Number of Pins 52
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Published 1999
JESD-609 Code e3
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 52
ECCN Code EAR99
Type Fanout Distribution, Multiplexer, Spread Spectrum Clock Generator, Zero Delay Buffer
Terminal Finish Matte Tin (Sn)
Technology CMOS
Voltage - Supply 2.9V~3.6V
Terminal Position QUAD
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Supply Voltage 3.3V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 20
Base Part Number CY29972
Output Clock
Pin Count 52
Number of Outputs 12
Operating Supply Voltage 3.3V
Number of Circuits 1
Nominal Supply Current 20mA
Frequency (Max) 125MHz
Input Clock, Crystal
Ratio - Input:Output 3:12
Primary Clock/Crystal Frequency-Nom 25MHz
PLL Yes with Bypass
Differential - Input:Output No/No
Divider/Multiplier Yes/No
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

CY29972AXIT Overview


As a clock IC, it uses the Tape & Reel (TR) package. The 52-TQFP package includes this clock generator. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. In it, there are 52 terminations to be found. The clock generator ic should be grounded with a voltage of 3.3V. As the Clock PLL's input, Clock, Crystal is designed to be used in order to generate the clock signal. 1 circuits are implemented to access the electronic component's full performance. This clock-based frequency generator provides a frequency up to 125MHz Max. PLL clock is mounted in the way of Surface Mount. There should be 2.9V~3.6V provided with this RF synthesizer. Using the test statistics, it is estimated that the ambient temperature should be set to -40°C~85°C. It's compatible with Clock logic levels. As far as this electronic part is concerned, it can be classified as a Fanout Distribution, Multiplexer, Spread Spectrum Clock Generator, Zero Delay Buffer component. This clock-generating IC is a 52-bit device designed explicitly for microprocessors. The related electrical components for the base part number CY29972 can be found below. PLL is designed with 52 pins. RF synthesizers can handle voltages up to 3.3V. The output frequency can be magnified as high as possible with the assistance of 12 signal outputs.

CY29972AXIT Features


Available in the 52-TQFP
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CY29972AXIT Applications


There are a lot of Cypress Semiconductor Corp CY29972AXIT Clock Generators applications.

  • Local oscillators (LOs)
  • Symbol synchronization
  • Clock synchronization
  • FM demodulation networks for FM operations
  • Coherent detection of the signal
  • Electronic equipment
  • Microprocessor clock multipliers
  • Wi-Fi routers
  • Automatic control
  • Picocells, femtocells and small cells

Write a review

Note: HTML is not translated!
    Bad           Good