banner_page

CY29973AXI

3.3V Fanout Distribution, Multiplexer, Spread Spectrum Clock Generator, Zero Delay Buffer 125MHz CY29973 Clock Generators 52 Pins 52-TQFP 52 Terminals Surface Mount 2.9V~3.6V Tray


  • Manufacturer: Cypress Semiconductor Corp
  • Nocochips NO: 217-CY29973AXI
  • Package: 52-TQFP
  • Datasheet: PDF
  • Stock: 249
  • Description: 3.3V Fanout Distribution, Multiplexer, Spread Spectrum Clock Generator, Zero Delay Buffer 125MHz CY29973 Clock Generators 52 Pins 52-TQFP 52 Terminals Surface Mount 2.9V~3.6V Tray (Kg)

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case 52-TQFP
Surface Mount YES
Number of Pins 52
Operating Temperature -40°C~85°C
Packaging Tray
Published 1999
JESD-609 Code e3
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 52
ECCN Code EAR99
Type Fanout Distribution, Multiplexer, Spread Spectrum Clock Generator, Zero Delay Buffer
Terminal Finish Matte Tin (Sn)
Voltage - Supply 2.9V~3.6V
Terminal Position QUAD
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.65mm
Base Part Number CY29973
Output Clock
Pin Count 52
Number of Outputs 12
Operating Supply Voltage 3.3V
Supply Voltage-Max (Vsup) 3.63V
Supply Voltage-Min (Vsup) 2.97V
Number of Circuits 1
Nominal Supply Current 20mA
Max Supply Current 20mA
Frequency (Max) 125MHz
Input PECL
Ratio - Input:Output 4:12
Max I(ol) 0.02 A
PLL Yes with Bypass
Differential - Input:Output No/No
Prop. Delay@Nom-Sup 0.33 ns
Propagation Delay (tpd) 0.33 ns
Divider/Multiplier Yes/No
Same Edge Skew-Max (tskwd) 0.35 ns
Height 1mm
Length 10mm
Width 10mm
Radiation Hardening No
RoHS Status Non-RoHS Compliant
Lead Free Lead Free

CY29973AXI Overview


As a clock IC, it is packaged by the Tray method. The 52-TQFP package embeds this Clock PLL. It contains 52 terminations that can be found in frequency synthesizer. For this clock generator ic, a voltage of 3.3V is required. As the Clock PLL's input, PECL is designed to be used in order to generate the clock signal. There are 1 circuits implemented in order to achieve full performance from this electronic part. 125MHz is the maximal value for normal operation. The Surface Mount allows this electrical component to be easily installed on the panel. The maximum voltage this clock PLL can handle is 3.63V. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 2.97V. There are 2.9V~3.6V available for use with this clock PLL. By calculating the test statistics, -40°C~85°C is the appropriate ambient temperature. As the name suggests, this is a clock generator that is compatible with Clock logic levels. An electrical part such as this one can be classified as a Fanout Distribution, Multiplexer, Spread Spectrum Clock Generator, Zero Delay Buffer component. It is a 52-bit clock PLL designed specifically for microprocessors. Related electrical parts can be found for the base part number CY29973. There is an available 52 pin on the PLL. In terms of the supply voltage, analog clock generator can handle 3.3V volts. 12 signal outputs allow for maximi12ation of output frequency. Low timing skew is provided by this analog clock generator at maximum 0.35 ns. During this clock generator operation, a maximum current of 20mA is supplied.

CY29973AXI Features


Available in the 52-TQFP
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CY29973AXI Applications


There are a lot of Cypress Semiconductor Corp CY29973AXI Clock Generators applications.

  • Electronic countermeasures
  • Phase modulation cellular systems
  • Automatic control system test
  • DVD add-on cards for multimedia PCs
  • Signal analyzer
  • Clock signals to the high-speed Digital RF circuits
  • Camera systems
  • Bit synchronization
  • Test equipment
  • Ultrasound diagnosis

Write a review

Note: HTML is not translated!
    Bad           Good