banner_page

CY2XP22ZXIT

2.5V Clock Generator 125MHz CY2XP22 Clock Generators 8 Pins 8-TSSOP (0.173, 4.40mm Width) 8 Terminals Surface Mount 2.375V~3.465V Tape & Reel (TR)


  • Manufacturer: Cypress Semiconductor Corp
  • Nocochips NO: 217-CY2XP22ZXIT
  • Package: 8-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 507
  • Description: 2.5V Clock Generator 125MHz CY2XP22 Clock Generators 8 Pins 8-TSSOP (0.173, 4.40mm Width) 8 Terminals Surface Mount 2.375V~3.465V Tape & Reel (TR) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Gold, Tin
Mounting Type Surface Mount
Package / Case 8-TSSOP (0.173, 4.40mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Published 2005
JESD-609 Code e3
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 8
ECCN Code EAR99
Type Clock Generator
Terminal Finish Matte Tin (Sn)
Additional Feature CAN ALSO OPERATES AT 3.3V SUPPLY
Technology CMOS
Voltage - Supply 2.375V~3.465V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Supply Voltage 2.5V
Terminal Pitch 0.65mm
Frequency 25MHz
Time@Peak Reflow Temperature-Max (s) 20
Base Part Number CY2XP22
Output LVPECL
Pin Count 8
Qualification Status Not Qualified
Power Supplies 2.5/3.3V
Number of Circuits 1
Frequency (Max) 125MHz
Input Crystal
Ratio - Input:Output 1:1
Primary Clock/Crystal Frequency-Nom 25MHz
PLL Yes
Differential - Input:Output No/Yes
Divider/Multiplier Yes/No
Duty Cycle 50 %
Length 4.4mm
Width 3mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

CY2XP22ZXIT Overview


The Tape & Reel (TR) method is used for packaging clock ICs. Clock PLL is embedded in the 8-TSSOP (0.173, 4.40mm Width) package. This clock generator ic can sustain 260 degrees of temperature during reflowing. As you can see, it consists of 8 terminations. Basically, a voltage of 2.5V should be applied to this electronic frequency generator. This clock generator receives its inputs from Crystal, which is designed to be the clock source. 1 circuits are implemented to access the electronic component's full performance. RF synthesizers based on this clock provide frequencies up to 125MHz maximum. With the Surface Mount, it is easy to install this electric component on the panel. As long as there are 2.375V~3.465V supply voltages provided, clock generator ic should work. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. The RF synthesizer is compatible with LVPECL logic levels. As far as this electronic part is concerned, it can be classified as a Clock Generator component. In particular, this clock PLL is designed to be used with microprocessors. This part number is related to its related electronic parts. There are 8 pins on the frequency generators that are available for use. This clock PLL features CAN ALSO OPERATES AT 3.3V SUPPLY for better clock signal output. When operated at 25MHz, frequency synthesizer achieves high efficiency.

CY2XP22ZXIT Features


Available in the 8-TSSOP (0.173, 4.40mm Width)
Supply voltage of 2.5V

CY2XP22ZXIT Applications


There are a lot of Cypress Semiconductor Corp CY2XP22ZXIT Clock Generators applications.

  • Main oscillator in receiver
  • Automatic test equipment
  • Radiotelephones
  • Radio receivers
  • Satellite receivers
  • Line cards used in telephone exchange
  • Peripheral devices
  • Communication infrastructure
  • Instrument
  • Frequency Modulation (FM) stereo decoders

Write a review

Note: HTML is not translated!
    Bad           Good