CY37512P352-83BGI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 388 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 352 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | 512 MACROCELLS; CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 83MHz |
| Pin Count | 352 |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 269 |
| Memory Type | EEPROM |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Organization | 5 DEDICATED INPUTS, 269 I/O |
| Programmable Logic Type | EE PLD |
| Number of Logic Blocks (LABs) | 32 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 5 |
| In-System Programmable | YES |
| Height Seated (Max) | 2.46mm |
| Length | 35mm |
| Width | 35mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
CY37512P352-83BGI Overview
There are 512 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).The item is enclosed in a BGA package.There are 269 I/Os on the board.The termination of a device is set to [0].BOTTOMis the terminal position of this electrical part.The power supply voltage is 5V.It is a part of family [0].It is equipped with 352 pin count.When using this device, 512 MACROCELLS; CONFIGURABLE I/O OPERATION WITH 3.3V OR 5Vis also available.In order to maintain high efficiency, the supply voltage should be maintained at [0].For data storage, EEPROMis adopted.In this case, it is mounted by Surface Mount.The device is designed with pins [0].A maximum voltage of 5.5Vis required for operation.Normally, it operates with a voltage of 4.5VV as its minimum supply voltage.This frequency can be achieved at 83MHz.In order to operate properly, the operating temperature should be higher than -40°C.A temperature less than 85°Cshould be used for operation.32logic blocks (LABs) make up this circuit.To detect the status of input signals, there are 5dedicated inputs.Types of programmable logic are divided into EE PLD.
CY37512P352-83BGI Features
BGA package
269 I/Os
352 pin count
388 pins
32 logic blocks (LABs)
CY37512P352-83BGI Applications
There are a lot of Cypress Semiconductor CY37512P352-83BGI CPLDs applications.
- High speed graphics processing
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Custom shift registers
- DDC INTERFACE
- White goods (Washing, Cold, Aircon ,...)
- Software-driven hardware configuration
- POWER-SAVING MODES
- PULSE WIDTH MODULATION (PWM)
- Cross-Matrix Switch
- ToR/Aggregation/Core Switch and Router
