CY37512VP256-66BGC
| Parameters | |
|---|---|
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 20ns |
| Height Seated (Max) | 2.46mm |
| Length | 27mm |
| Width | 27mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 292-BGA |
| Number of Pins | 292 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2003 |
| Series | Ultra37000™ |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| Terminal Finish | TIN LEAD |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CY37512 |
| Pin Count | 256 |
| JESD-30 Code | S-PBGA-B256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In-System Reprogrammable™ (ISR™) CMOS |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 197 |
| Memory Type | EEPROM |
| Propagation Delay | 20 ns |
| Number of Gates | 15000 |
| Max Frequency | 66MHz |
| Number of Logic Blocks (LABs) | 32 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 1 |
CY37512VP256-66BGC Overview
In the mobile phone network, there are 512macro cells, which are cells with high-power antennas and towers.You can find it in package [0].It is programmed with 197 I/Os.There are 256 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.There is a BOTTOMterminal position on the electrical part in question.The power supply voltage is 3.3V.The part is included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.Due to its reliability, it is operated at a temperature of [0].It is recommended that the chip be mounted by Surface Mount.In this case, it is a type of FPGA belonging to the Ultra37000? series.In this chip, the 256pins are programmed.The CY37512can be used to identify its related parts.15000gates are used to construct digital circuits.Optimal efficiency requires a supply voltage of [0].For data storage, EEPROMis adopted.This electronic part is mounted in the way of Surface Mount.The device has a pinout of [0].In this case, the maximum supply voltage is 3.6V.With a minimal supply voltage of [0], it operates.It should be below 66MHzat the maximal frequency.It consists of 32 logic blocks (LABs).Input signals are detected using 1dedicated inputs.
CY37512VP256-66BGC Features
292-BGA package
197 I/Os
The operating temperature of 0°C~70°C TA
256 pin count
292 pins
32 logic blocks (LABs)
CY37512VP256-66BGC Applications
There are a lot of Cypress Semiconductor Corp CY37512VP256-66BGC CPLDs applications.
- I/O PORTS (MCU MODULE)
- Power automation
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Preset swapping
- Configurable Addressing of I/O Boards
- Interface bridging
- Power up sequencing
- Address decoders
- Timing control
- Protection relays
