CY74FCT157ATDE4
| Parameters | |
|---|---|
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | 74FCT157 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 4 x 2:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 50pF |
| Throw Configuration | DPST |
| Propagation Delay | 5 ns |
| Family | FCT |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Supply Type | Single |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Input Lines | 2 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
CY74FCT157ATDE4 Overview
It is included in the 16-SOIC (0.154, 3.90mm Width) in order to save board space.It is packaged in the way of Tube.Surface Mount is the mounting method digital switch ic uses.The multiplexers uses an analog IC Multiplexer as the analog part of the circuit.The operating temperature of -40°C~85°C will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 4.75V~5.25V supply voltage.Several applications are possible for 74FCT series multiplexers.As part of its basic configuration, 16 terminations are designed as a part of it.There is a base part number of 74FCT157 which can also be used in order to locate the logic switch that are related to this item.The voltage supplied for multiplexer's system is 5V.multiplexer's systemThis turn signal switch consists of 16 component pins.Conductors terminate at GULL WING in this design.As a type of supply, Single is employed.A total of 16 pins are configured on this board.It is positioned in the direction of Surface Mount.The logic switch is a member of the FCT family.The minimal supply voltage (Vsup) should be kept at 4.75V to avoid some unnecessary failures.In order to maintain mux switch's normal operation, power is provided to 5V.There are 1 outputs designed for the operation of the turn signal switch.In order to accept voltage levels, the multiplexers have input lines 2 on the board.
CY74FCT157ATDE4 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
2 input lines
CY74FCT157ATDE4 Applications
There are a lot of Texas Instruments CY74FCT157ATDE4 Signal Switches / Multiplexers / Decoders applications.
- PCIe
- Used to connect a single source to multiple destinations
- Make full adder
- Data-routing applications
- VGA
- Automation system
- Frequency multiplexing system
- Arithmetic Logic Units
- High-performance memory systems
- Communication system
