CY74FCT157CTSOC
| Parameters | |
|---|---|
| Current - Output High, Low | 32mA 64mA |
| Supply Type | Single |
| Bandwidth | 70MHz |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Weight | 420.395078mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT157 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Circuit | 4 x 2:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Power Dissipation | 600mW |
| Number of Bits | 2 |
| Throw Configuration | DPST |
| Propagation Delay | 4.3 ns |
| Quiescent Current | 100μA |
| Family | FCT |
| Logic Function | Multiplexer, Mux |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
CY74FCT157CTSOC Overview
In order to conserve board space, digital switch is included in the 16-SOIC (0.295, 7.50mm Width).Tube is the method used for packaging.Surface Mount is the mounting method digital switch ic uses.In the multiplexers, the analog IC Multiplexer is used.The operating temperature of -40°C~85°C will not be susceptible to external factors.With a supply voltage of 4.75V~5.25V, designers have greater flexibility of digital controlled switch.These multiplexers are members of the 74FCT series, which provide extensive application potential.It is designed with 16 terminations as part of its basic configuration.Its logic switch base part number is 74FCT157 which can also be used to find its logic switch related parts.The multiplexer's system is supplied with a voltage of 5V.In this turn signal switch, there are 16 component pins.It employs GULL WING as the point at which conductors come to an end.Its supply type is Single, which is used as the source of power.This multiplexer ic has 16 pins configured.This unit is mounted in the way of Surface Mount.The logic switch is included into the family of FCT.There are 2 bits in signal multiplexer.It is provided that 5V has a power supply in order to function normally.In order for the turn signal switch to work, there are 1 outputs.Without external influences, it consumes 100μA current of multiplexer ic.A multiplexer such as this has 8 inputs available.This turn signal switch's circuit uses 4 transmission channels.
CY74FCT157CTSOC Features
Supplied in the 16-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
CY74FCT157CTSOC Applications
There are a lot of Texas Instruments CY74FCT157CTSOC Signal Switches / Multiplexers / Decoders applications.
- Communication system
- Seven segment displays
- HDMI applications
- Audio transmission
- Data bus control
- Make full adder
- Used to connect a single source to multiple destinations
- Transmission from the computer system of a satellite
- Data distribution
- Automation system
