CY74FCT162373ATPVC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74FCT162373 |
| Pin Count | 48 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Operating Supply Current | 16.5mA |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Max Supply Current | 5μA |
| Number of Bits | 16 |
| Propagation Delay | 5.2 ns |
| Quiescent Current | 500μA |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 0.5mA |
| Number of Output Lines | 16 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT162373ATPVC Overview
There is an embedded version of it in package 48-BSSOP (0.295, 7.50mm Width). Tube is the way in which it is packaged. The output it is configured with uses Tri-State. There is a logic type of D-Type Transparent Latch associated with this electrical device. Electronic components are mounted using the Surface Mount method. The voltage supply is 4.5V~5.5V. The operating temperature is -40°C~85°C. The 74FCT series of FPGAs is the one this FPGA belongs to. An electronic part with 16 bits is designed. This device is designed with 48 terminations. The family in which it belongs to is 74FCT162373. The supply voltage of the device is 5V. There are 48 pins on it. It is part of the family of electronic devices called FCT. There are 48 pins on it. A Surface Mount mounting method has been used for this electronic part. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The part is in the FF/Latches subcategory. The system is powered by 5V sources. With an output current of 24mA, it is highly flexible in terms of design. High efficiency requires a voltage supply of 5V. The binary equivalent of the input line is generated by 16 output lines. Without external influences, it consumes 500μA of quiescent current. 2 elements are present in it. Maximum power supply (ICC) for its operation is 0.5mA.
CY74FCT162373ATPVC Features
48-BSSOP (0.295, 7.50mm Width) package
74FCT series
16 Bits
74FCT162373 family
48 pin count
48 pins
5V power supplies
2 elements
CY74FCT162373ATPVC Applications
There are a lot of Texas Instruments CY74FCT162373ATPVC Latches applications.
- Storage
- Lamp and Display (LED)
- Hammer Device Information
- Ring counter
- Sample and hold register
- Parallel-to-Serial Data Conversion
- Multi-line decoders
- TV Set-top Boxes
- Relay
- Address register
