CY74FCT162373CTPVC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74FCT162373 |
| Pin Count | 48 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 16.5mA |
| Output Current | 24mA |
| Number of Bits | 16 |
| Propagation Delay | 4.2 ns |
| Quiescent Current | 500μA |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 0.5mA |
| Number of Output Lines | 16 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT162373CTPVC Overview
In the 48-BSSOP (0.295, 7.50mm Width) package, it can be found as an embedded module. Tube is the way in which it is packaged. Tri-State is used for the output it is configured with. D-Type Transparent Latch is the logic type of this electrical device. Electronic parts are mounted in accordance with Surface Mount. The supply voltage of the device is 4.5V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. 74FCT is the series number of this FPGA. Electronic parts with 16 bits are designed for this application. In this device, there are 48 terminations that have been designed. This type belongs to the 74FCT162373 family. A 5V voltage supply is required for operation. The device is equipped with 48 pins. This electronic device is categorized as a FCT electronic device. Designed with 48 pins, it is compatible with a wide range of devices. Electronic parts are mounted using the Surface Mount method. In this device, there is a total of 2 ports available for use. Subcategory FF/Latches includes this part. There are 5V power supplies required for this machine to operate. Its 24mA output current allows for maximum design flexibility. High efficiency requires maintaining the supply voltage at 5V. Regardless of the input line, the binary equivalent of the input line will be generated by the 16 output lines. It consumes 500μA current from its quiescent state without being affected by external factors at all. There are 2 elements in it. Its maximum current supply (ICC) reaches 0.5mA.
CY74FCT162373CTPVC Features
48-BSSOP (0.295, 7.50mm Width) package
74FCT series
16 Bits
74FCT162373 family
48 pin count
48 pins
5V power supplies
2 elements
CY74FCT162373CTPVC Applications
There are a lot of Texas Instruments CY74FCT162373CTPVC Latches applications.
- Buffer Storage
- Storage
- Parallel-to-Serial Data Conversion
- Bus system register with enable parallel lines at bus side
- Counter timers
- Parallel data synchronization
- Shift Registers
- Meter applications
- Lamp and Display (LED)
- Ring counter
