CY74FCT162374ATPVC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74FCT162374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 16 |
| Propagation Delay | 6.5 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Logic Function | AND, D-Type |
| Current - Quiescent (Iq) | 500μA |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 24mA 24mA |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Power Supply Current-Max (ICC) | 0.5mA |
| Number of Output Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT162374ATPVC Overview
In the form of 48-BSSOP (0.295, 7.50mm Width), it has been packaged. As part of the package Tube, it is embedded. T flip flop uses Tri-State, Non-Invertedas its output configuration. In the configuration of the trigger, Positive Edgeis used. There is an electronic component mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. The operating temperature is -40°C~85°C TA. D-Typeis the type of this D latch. JK flip flop is a part of the 74FCTseries of FPGAs. A total of 2 elements are present. As a result, it consumes 500μA quiescent current and is not affected by external forces. It has been determined that there have been 48 terminations. JK flip flop belongs to 74FCT162374 family. It is powered from a supply voltage of 5V. Its input capacitance is 4.5pFfarads. This D flip flop belongs to the family of FCT. This electronic part is mounted in the way of Surface Mount. This board is designed with 48pins on it. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. There are 16bits in this flip flop. 1 circuits are used to achieve its superior flexibility. The D latch operates on 5V volts. The flip flop has 2embedded ports. Optimal efficiency requires a supply voltage of 5V. With an output current of 24mA, this device offers maximum design flexibility. It has 8 output lines to operate.
CY74FCT162374ATPVC Features
Tube package
74FCT series
48 pins
16 Bits
5V power supplies
CY74FCT162374ATPVC Applications
There are a lot of Texas Instruments CY74FCT162374ATPVC Flip Flops applications.
- Latch
- Shift Registers
- Divide a clock signal by 2 or 4
- Test & Measurement
- Balanced 24 mA output drivers
- ESD performance
- 2 – Bit synchronous counter
- Power down protection
- Storage registers
- Storage Registers
