banner_page

CY74FCT162841CTPVC

D-Type, Latch 4.5V~5.5V 20 Bits Tri-State Latches 74FCT Series 74FCT162841 56 Pins DUAL CMOS 56-BSSOP (0.295, 7.50mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-CY74FCT162841CTPVC
  • Package: 56-BSSOP (0.295, 7.50mm Width)
  • Datasheet: -
  • Stock: 427
  • Description: D-Type, Latch 4.5V~5.5V 20 Bits Tri-State Latches 74FCT Series 74FCT162841 56 Pins DUAL CMOS 56-BSSOP (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 56-BSSOP (0.295, 7.50mm Width)
Number of Pins 56
Weight 694.790113mg
Operating Temperature -40°C~85°C
Packaging Tube
Series 74FCT
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 56
Subcategory FF/Latches
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Terminal Pitch 0.635mm
Base Part Number 74FCT162841
Pin Count 56
Output Type Tri-State
Operating Supply Voltage 5V
Number of Elements 2
Circuit 10:10
Polarity Non-Inverting
Power Supplies 5V
Load Capacitance 50pF
Number of Ports 2
Nominal Supply Current 20.5mA
Output Current 24mA
Number of Bits 20
Propagation Delay 15 ns
Quiescent Current 500μA
Turn On Delay Time 1.5 ns
Family FCT
Logic Function D-Type, Latch
Output Characteristics 3-STATE WITH SERIES RESISTOR
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
Prop. Delay@Nom-Sup 5.5 ns
Control Type ENABLE LOW/HIGH
Number of Output Lines 20
Translation N/A
Height 2.79mm
Length 18.41mm
Width 7.49mm
Thickness 2.59mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

CY74FCT162841CTPVC Overview


In the package 56-BSSOP (0.295, 7.50mm Width), it can be found. Packaged in the way of Tube. The output it is configured with uses Tri-State. This electrical device has the logic type D-Type Transparent Latch. The electronic component is mounted according to the Surface Mount method. There is no supply voltage for this device. A temperature of -40°C~85°C is set as the operating temperature. It is a type of FPGA belonging to the 74FCT series. It is designed with 20 bits. A device with this design has 56 terminations. There is no doubt that it belongs to the family 74FCT162841. In order to operate it, the supply voltage must be 5V. It is equipped with 56 pin count. FCT is the family name of this electronic device. With the design of the board, there are only 56 pins. Mounting this electronic component follows the Surface Mount method. This device has 2 ports that can be connected to it. This part is included in FF/Latches. There are 5V power supplies attached to it. The output current of 24mA makes it feature maximum design flexibility. For maximum efficiency, the supply voltage should be set to 5V. Regardless of the input line, the binary equivalent of the input line will be generated by the 20 output lines. It consumes 500μA of quiescent current without being affected by external factors. 2 elements are present in it.

CY74FCT162841CTPVC Features


56-BSSOP (0.295, 7.50mm Width) package
74FCT series
20 Bits
74FCT162841 family
56 pin count
56 pins
5V power supplies
2 elements

CY74FCT162841CTPVC Applications


There are a lot of Texas Instruments CY74FCT162841CTPVC Latches applications.

  • Parallel data storage
  • Lamp and Display (LED)
  • Shift right with parallel loading
  • Decade counting 7-segment decimal display
  • Counter
  • Multi-line decoders
  • Shift left with parallel loading
  • Serial Input
  • Parallel Output
  • Instrumentation

Write a review

Note: HTML is not translated!
    Bad           Good