CY74FCT16373ATPVC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74FCT16373 |
| Pin Count | 48 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Operating Supply Current | 16.5mA |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Max Supply Current | 5μA |
| Number of Bits | 16 |
| Propagation Delay | 6.7 ns |
| Quiescent Current | 500μA |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 0.5mA |
| Number of Output Lines | 16 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT16373ATPVC Overview
The package in which it is embedded is named 48-BSSOP (0.295, 7.50mm Width). As a result, it has a packaging of Tube. It uses the output configuration Tri-State. This electrical device has Logic type D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. There is no supply voltage for this device. A temperature of -40°C~85°C is used for operation. In the 74FCT series, this FPGA is located. The design of this electronic part contains 16 bits. This device has been designed with 48 terminations available. This type belongs to the 74FCT16373 family. In order to operate it, the supply voltage must be 5V. 48 pins are included. In terms of electronic devices, this one is in the FCT family. Designed with 48 pins, it is compatible with a wide range of devices. It is mounted according to the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This part is included in FF/Latches. There are 5V power supplies attached to it. Due to its 64mA output current, it offers maximum design flexibility. The supply voltage should be maintained at 5V for high efficiency. There are 16 output lines that correspond to the binary equivalents of the input line. Without external influences, it consumes 500μA quiescent current. A total of 2 elements make up this object. Its maximum current supply (ICC) reaches 0.5mA.
CY74FCT16373ATPVC Features
48-BSSOP (0.295, 7.50mm Width) package
74FCT series
16 Bits
74FCT16373 family
48 pin count
48 pins
5V power supplies
2 elements
CY74FCT16373ATPVC Applications
There are a lot of Texas Instruments CY74FCT16373ATPVC Latches applications.
- Buffer Storage
- Motor Drives
- Flip-flops
- Serial Output Register
- Storage
- Address register
- Serial Input
- Synchronous frequency dividers
- PCs and Notebooks
- A/D converters
