Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
48-TFSOP (0.173, 4.40mm Width) |
Number of Pins |
48 |
Weight |
123.490523mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74FCT |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
48 |
Subcategory |
FF/Latches |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.4mm |
Reach Compliance Code |
unknown |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74FCT16373 |
Pin Count |
48 |
Qualification Status |
Not Qualified |
Output Type |
Tri-State |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4.5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
16.5mA |
Number of Bits |
8 |
Propagation Delay |
5.2 ns |
Quiescent Current |
5μA |
Turn On Delay Time |
2 ns |
Family |
FCT |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Current - Output High, Low |
32mA 64mA |
Logic Type |
D-Type Transparent Latch |
Max I(ol) |
0.064 A |
Number of Input Lines |
16 |
Independent Circuits |
2 |
Length |
9.7mm |
Width |
4.4mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CY74FCT16373ATVR Overview
It is embedded in the 48-TFSOP (0.173, 4.40mm Width) package. The package is in the form of Tape & Reel (TR). In this configuration, the output is set to Tri-State. In this electrical device, the logic type is D-Type Transparent Latch. Electronic parts are mounted in accordance with Surface Mount. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. There is a temperature of -40°C~85°C at which the system operates. The 74FCT series is associated with this FPGA. 8 Bits are used in the design of this electronic part. This device has been designed with 48 terminations available. It belongs to 74FCT16373 family. In order to function, the supply voltage should be set to 5V. 48 pins are provided. It is part of the family of electronic devices called FCT. The 48 pins are designed into it. Surface Mount is the method used for mounting this electronic part. 2 ports are available on this device. This part can be found within the FF/Latches subcategory. It is possible to reach 5.5V when the maximum supply voltage (Vsup) has been reached. A total of 5V power supplies are required for it to operate. It is recommended to have a higher supply voltage (Vsup) than 4.5V. It consists of 16 input lines from which an electronic circuit can be built. Considering the reliability of this device, it would be a good candidate for TAPE AND REEL. The quiescent current consumed by it is 5μA because it is unaffected by external factors.
CY74FCT16373ATVR Features
48-TFSOP (0.173, 4.40mm Width) package
74FCT series
8 Bits
74FCT16373 family
48 pin count
48 pins
5V power supplies
CY74FCT16373ATVR Applications
There are a lot of Texas Instruments CY74FCT16373ATVR Latches applications.
- OC-48 communication systems
- Automotive Infotainment
- Multi-line decoders
- Synchronous frequency dividers
- Meter applications
- Automatic test equipment
- Shift left register
- Digital bus buffer
- Relay
- Frequency dividing