CY74FCT16373ATVRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 48 |
| Weight | 123.490523mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT16373 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 16.5mA |
| Number of Bits | 8 |
| Propagation Delay | 5.2 ns |
| Quiescent Current | 5μA |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Number of Input Lines | 16 |
| Independent Circuits | 2 |
| Length | 9.7mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT16373ATVRE4 Overview
In the 48-TFSOP (0.173, 4.40mm Width) package, it can be found as an embedded module. A Tape & Reel (TR) package is used to package it. In this configuration, the output is set to Tri-State. In this electrical device, the logic type is D-Type Transparent Latch. Surface Mount is used to mount this electronic part. A voltage of 4.5V~5.5V is used as the supply voltage for this device. It operates at -40°C~85°C degrees Celsius. It is a type of FPGA belonging to the 74FCT series. The design of this electronic part contains 8 bits. In this device, there are 48 terminations. The family it belongs to is 74FCT16373. With a supply voltage of 5V, it operates. It is equipped with 48 pin count. In the world of electronics, this electronic device belongs to the family of FCT. This board has 48 pins on it, which is what it is designed for. The electronic part is mounted using the Surface Mount method. This device is equipped with 2 ports. This part can be found within the FF/Latches subcategory. During this period, the maximum supply voltage (Vsup) reaches 5.5V. There is 5V power supply for it. A voltage greater than 4.5V must be supplied as a power supply (Vsup). An electronic circuit can be found on 16 input lines. This device is well suited for TAPE AND REEL based on its reliable performance. Without external influences, it consumes 5μA of quiescent current.
CY74FCT16373ATVRE4 Features
48-TFSOP (0.173, 4.40mm Width) package
74FCT series
8 Bits
74FCT16373 family
48 pin count
48 pins
5V power supplies
CY74FCT16373ATVRE4 Applications
There are a lot of Texas Instruments CY74FCT16373ATVRE4 Latches applications.
- Frequency dividing
- Phase comparator
- Four-bit storage with output enable
- OC-48 communication systems
- Shift left register
- Automotive Infotainment
- Avionics
- Timers
- Motor Drives
- Frequency
