CY74FCT16373CTPACT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Weight | 223.195796mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74FCT16373 |
| Pin Count | 48 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 16.5mA |
| Output Current | 64mA |
| Number of Bits | 16 |
| Propagation Delay | 5.5 ns |
| Quiescent Current | 5μA |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 0.5mA |
| Number of Output Lines | 16 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT16373CTPACT Overview
48-TFSOP (0.240, 6.10mm Width) contains it. Tape & Reel (TR) is the way it is packaged. In this configuration, the output is set to Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. Electronic components are mounted using the Surface Mount method. With a supply voltage of 4.5V~5.5V, it operates. There is -40°C~85°C operating temperature. 74FCT is the series number of this FPGA. There are 16 bits in this electronic part. The device consists of 48 terminations that are designed to be used in conjunction with it. 74FCT16373 is its family. It operates with a supply voltage of 5V. It has 48 pins that makes it easy to use. FCT is the family of this electronic device. The pin configuration of the device is 48. Surface Mount is used to mount this electronic part. This device has 2 ports. There is a subcategory of FF/Latches for this part. The device is powered by 5V power supplies. Its reliable performance makes it an excellent choice for TR. The 64mA output current gives it maximum design flexibility. If you want to achieve high efficiency, make sure the supply voltage is at 5V. There are 16 output lines that correspond to the binary equivalents of the input line. As far as external factors are concerned, it consumes 5μA of quiescent current without getting affected by them. A total of 2 elements make up this object. When the maximum power current (ICC) is supplied for its operation, it reaches 0.5mA.
CY74FCT16373CTPACT Features
48-TFSOP (0.240, 6.10mm Width) package
74FCT series
16 Bits
74FCT16373 family
48 pin count
48 pins
5V power supplies
2 elements
CY74FCT16373CTPACT Applications
There are a lot of Texas Instruments CY74FCT16373CTPACT Latches applications.
- Shift left register
- Pattern generators
- Synchronous frequency dividers
- Serial Input
- BCD counting
- Phase comparator
- Hammer Device Information
- Decade counting 7-segment decimal display
- Instrumentation
- Flip-flops
