CY74FCT16373CTVR
| Parameters | |
|---|---|
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74FCT16373 |
| Pin Count | 48 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 16.5mA |
| Number of Bits | 16 |
| Propagation Delay | 5.5 ns |
| Quiescent Current | 5μA |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Number of Output Lines | 16 |
| Length | 9.7mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 48 |
| Weight | 123.490523mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
CY74FCT16373CTVR Overview
A package called 48-TFSOP (0.173, 4.40mm Width) contains it. As a result, it has a packaging of Tape & Reel (TR). It uses the output configuration Tri-State. A D-Type Transparent Latch logic type is used in this electrical device. The way in which this electronic part is mounted is Surface Mount. The supply voltage of the device is 4.5V~5.5V. The temperature at which the machine is operating is -40°C~85°C. This FPGA is part of the 74FCT series. With this electronic part, there are 16 bits. A device with this design has 48 terminations. The family it belongs to is 74FCT16373. With the supply voltage set at 5V, it is able to operate. There are 48 pins attached to it. In terms of electronic devices, this one is in the FCT family. With the design of the board, there are only 48 pins. A Surface Mount mounting method has been used for this electronic part. This device is equipped with 2 ports. This part can be found within the FF/Latches subcategory. There are 5V power supplies attached to it. As a result of its reliable performance, it is well suited for TAPE AND REEL. High efficiency requires maintaining the supply voltage at 5V. There are 16 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. Without external influences, it consumes 5μA quiescent current. A total of 2 elements make up this object.
CY74FCT16373CTVR Features
48-TFSOP (0.173, 4.40mm Width) package
74FCT series
16 Bits
74FCT16373 family
48 pin count
48 pins
5V power supplies
2 elements
CY74FCT16373CTVR Applications
There are a lot of Texas Instruments CY74FCT16373CTVR Latches applications.
- Parallel data storage
- Automotive ADAS
- Double bus register system
- Serial Output Data Queuing
- Counting
- Shift left register
- Shift Registers
- Multi-line decoders
- Bus system register with enable parallel lines at bus side
- Frequency dividing
