CY74FCT16374CTPVCT
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT16374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 16 |
| Propagation Delay | 5.2 ns |
| Quiescent Current | 5μA |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 500μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Width | 7.49mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT16374CTPVCT Overview
It is packaged in the way of 48-BSSOP (0.295, 7.50mm Width). It is contained within the Tape & Reel (TR)package. There is a Tri-State, Non-Invertedoutput configured with it. There is a trigger configured with Positive Edge. Surface Mountis in the way of this electric part. The JK flip flop operates at 4.5V~5.5Vvolts. It is operating at -40°C~85°C TA. This D latch has the type D-Type. The FPGA belongs to the 74FCT series. A total of 2elements are contained within it. There is a consumption of 500μAof quiescent energy. There are 48 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 74FCT16374 family contains it. The power supply voltage is 5V. The input capacitance of this JK flip flopis 4.5pF farads. FCTis the family of this D flip flop. This electronic part is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 48. It has a clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. 16bits are used in its design. As a result of its reliability, this D flip flop is ideally suited for TAPE AND REEL. It operates from 5V power supplies. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. In order to achieve high efficiency, the supply voltage should be maintained at 5V. The 64mA output current allows it to be designed with the greatest amount of flexibility. In order for the chip to function, it has 8output lines. 5μAquiescent current consumed.
CY74FCT16374CTPVCT Features
Tape & Reel (TR) package
74FCT series
48 pins
16 Bits
5V power supplies
CY74FCT16374CTPVCT Applications
There are a lot of Texas Instruments CY74FCT16374CTPVCT Flip Flops applications.
- Modulo – n – counter
- Data storage
- Clock pulse
- Automotive
- Data Synchronizers
- Load Control
- Memory
- Safety Clamp
- Digital electronics systems
- Registers
