CY74FCT16374TPVC
| Parameters | |
|---|---|
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 16 |
| Propagation Delay | 10 ns |
| Quiescent Current | 5μA |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 500μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Power Supply Current-Max (ICC) | 0.5mA |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT16374 |
| Function | Standard |
CY74FCT16374TPVC Overview
The item is packaged in 48-BSSOP (0.295, 7.50mm Width)cases. D flip flop is embedded in the Tube package. This output is configured with Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. Surface Mountis positioned in the way of this electronic part. A voltage of 4.5V~5.5Vis used as the supply voltage. A temperature of -40°C~85°C TAis used in the operation. This logic flip flop is classified as type D-Type. It is a type of FPGA belonging to the 74FCT series. In total, there are 2 elements. There is 500μA quiescent consumption. 48terminations have occurred. D latch belongs to the 74FCT16374 family. It is powered from a supply voltage of 5V. Input capacitance of this device is 4.5pF farads. Devices in the FCTfamily are electronic devices. It is mounted in the way of Surface Mount. As you can see from the design, it has pins with 48. A Positive Edgeclock edge trigger is used in this device. There is a base part number FF/Latchesfor the RS flip flops. An electronic part designed with 16bits is used in this application. Due to its superior flexibility, it uses 1 circuits. In order for the device to operate, it requires 5V power supplies. The flip flop has 2ports embedded within it. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. In addition to its maximum design flexibility, the output current of the T flip flop is 64mA. It has 3 output lines to operate. In terms of quiescent current, it consumes 5μA .
CY74FCT16374TPVC Features
Tube package
74FCT series
48 pins
16 Bits
5V power supplies
CY74FCT16374TPVC Applications
There are a lot of Texas Instruments CY74FCT16374TPVC Flip Flops applications.
- ESD protection
- QML qualified product
- Single Down Count-Control Line
- ESD performance
- Data Synchronizers
- Data transfer
- Pattern generators
- Shift Registers
- Test & Measurement
- Cold spare funcion
