CY74FCT16500CTPVC
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT16500 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 18-Bit |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 5μA |
| Number of Ports | 2 |
| Max Supply Current | 500μA |
| Number of Bits | 18 |
| Propagation Delay | 5.3 ns |
| Family | FCT |
| Logic Function | Transceiver |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | Universal Bus Transceiver |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 4.6 ns |
| Trigger Type | NEGATIVE EDGE |
| Control Type | INDEPENDENT CONTROL |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 2.59mm |
| Length | 18.41mm |
| Width | 7.49mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74FCT |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| HTS Code | 8542.39.00.01 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
CY74FCT16500CTPVC Overview
It is embedded in the 56-BSSOP (0.295, 7.50mm Width) package. The package is packaged in the way that Tube would package it. A 18-Bit circuit achieves its superior flexibility by using 18-Bit components. As far as the logic type of this electrical device is concerned, it is Universal Bus Transceiver. In this case, the electronic part is mounted in the direction of Surface Mount. Operating temperatures should be higher than -40°C~85°C. Featuring high and low output currents, 32mA 64mA offers maximum design versatility. An FPGA of this type belongs to the series 74FCT and belongs to the category of FPGAs. It belongs to 74FCT16500 family. Transmission lines can be terminated with 56 terminations by using a device that matches the characteristic impedance. For normal operation, the supply voltage must be kept above 5V in order for the device to function properly. 56 pins are included. It is designed with 18 Bits. 2 terminations are the kind of termination that occurs when a transmission line is terminated with a device that matches the characteristic impedance of the transmission line. In this case, the electronic part will be mounted in the Surface Mount-direction. The 56 pins are designed into it. The electronic device in question belongs to the FCT family of electronic devices. Powered by 5V power supplies, it runs on a battery. NEGATIVE EDGE is the trigger configured with it. There is a supply voltage of 5V that is used to power this electrical part. It operates with the minimal supply voltage of 4.5V. 5.5V's maximum supply voltage is supported by it. The maximal current supplied for its operation reaches 500μA.
CY74FCT16500CTPVC Features
56-BSSOP (0.295, 7.50mm Width) package
74FCT series
74FCT16500 family
56 pin count
56 pins
5V power supplies
CY74FCT16500CTPVC Applications
There are a lot of Texas Instruments CY74FCT16500CTPVC Universal Bus Functions applications.
- Automatic watering system
- Small ground power station
- CMOS circuitry
- Networking
- Street lights
- Square wave oscillators
- Fishery-optical complementary power station
- Overcurrent/Short circuit protection
- Various travel, camping, medical emergency appliances
- Instrumentation Systems
