CY74FCT16823CTPVCT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74FCT16823 |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 18 |
| Propagation Delay | 12.5 ns |
| Quiescent Current | 5μA |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 500μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 12.5ns @ 300pF |
| Prop. Delay@Nom-Sup | 6 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Power Supply Current-Max (ICC) | 0.5mA |
| Number of Output Lines | 9 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 2.79mm |
| Length | 18.41mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT16823CTPVCT Overview
The package is in the form of 56-BSSOP (0.295, 7.50mm Width). A package named Tape & Reel (TR)includes it. Tri-State, Non-Invertedis the output configured for it. It is configured with a trigger that uses a value of Positive Edge. Surface Mountmounts this electrical part. The supply voltage is set to 4.5V~5.5V. It is operating at -40°C~85°C TA. The type of this D latch is D-Type. The 74FCTseries comprises this type of FPGA. A total of 2 elements are present. As a result, it consumes 500μA quiescent current and is not affected by external forces. Terminations are 56. JK flip flop belongs to 74FCT16823 family. An input voltage of 5Vpowers the D latch. This JK flip flop has a 4.5pFfarad input capacitance. In this case, the D flip flop belongs to the FCTfamily. It is mounted by the way of Surface Mount. As you can see from the design, it has pins with 56. This device exhibits a clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. There are 18bits in its design. As a result of its reliable performance, this T flip flop is suitable for TR. It operates from 5V power supplies. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. The output current of 64mA makes it feature maximum design flexibility. To operate, the chip has a total of 9 output lines. In terms of quiescent current, it consumes 5μA .
CY74FCT16823CTPVCT Features
Tape & Reel (TR) package
74FCT series
56 pins
18 Bits
5V power supplies
CY74FCT16823CTPVCT Applications
There are a lot of Texas Instruments CY74FCT16823CTPVCT Flip Flops applications.
- Power down protection
- Dynamic threshold performance
- Reduced system switching noise
- Modulo – n – counter
- Frequency Dividers
- Storage Registers
- Circuit Design
- Balanced Propagation Delays
- Shift Registers
- Shift registers
