CY74FCT16841ATPVC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74FCT16841 |
| Pin Count | 56 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 10:10 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 20.5mA |
| Output Current | 64mA |
| Number of Bits | 20 |
| Propagation Delay | 23 ns |
| Quiescent Current | 5μA |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 9 ns |
| Control Type | ENABLE LOW/HIGH |
| Number of Output Lines | 20 |
| Translation | N/A |
| Height | 2.79mm |
| Length | 18.41mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT16841ATPVC Overview
In the 56-BSSOP (0.295, 7.50mm Width) package, it is embedded. Packaged in the way of Tube. In this configuration, the output is set to Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. This electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. There is a temperature of -40°C~85°C at which the system operates. The 74FCT series contains FPGAs of this type. An electronic part with 20 bits is designed. There are 56 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The family it belongs to is 74FCT16841. In order to operate it, the supply voltage must be 5V. With 56 pins, it is equipped. It is part of the family of electronic devices called FCT. In addition, it is designed with a pin number of 56. Surface Mount is the method used for mounting this electronic part. In this device, there is a total of 2 ports available for use. Subcategory FF/Latches contains this part. There are 5V power supplies attached to it. Due to its 64mA output current, it offers maximum design flexibility. The supply voltage should be maintained at 5V for high efficiency. Input lines are generated as binary equivalents by 20 output lines. It consumes 5μA of quiescent current without being affected by outside factors. A total of 2 elements make up this object.
CY74FCT16841ATPVC Features
56-BSSOP (0.295, 7.50mm Width) package
74FCT series
20 Bits
74FCT16841 family
56 pin count
56 pins
5V power supplies
2 elements
CY74FCT16841ATPVC Applications
There are a lot of Texas Instruments CY74FCT16841ATPVC Latches applications.
- Address register
- Clocks
- Four-bit storage with output enable
- Synchronous frequency dividers
- Automotive HEV/EV Powertrain
- Flip-flops
- Parallel data storage
- Multi-line decoders
- Lamp and Display (LED)
- Buffer register
