banner_page

CY74FCT16841ATPVCT

D-Type, Latch 4.5V~5.5V 10 Bits Tri-State Latches 74FCT Series 74FCT16841 56 Pins DUAL CMOS 56-BSSOP (0.295, 7.50mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-CY74FCT16841ATPVCT
  • Package: 56-BSSOP (0.295, 7.50mm Width)
  • Datasheet: -
  • Stock: 838
  • Description: D-Type, Latch 4.5V~5.5V 10 Bits Tri-State Latches 74FCT Series 74FCT16841 56 Pins DUAL CMOS 56-BSSOP (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 56-BSSOP (0.295, 7.50mm Width)
Number of Pins 56
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series 74FCT
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 56
ECCN Code EAR99
Subcategory FF/Latches
Packing Method TAPE AND REEL
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 2
Supply Voltage 5V
Terminal Pitch 0.635mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number 74FCT16841
Pin Count 56
Qualification Status Not Qualified
Output Type Tri-State
Circuit 10:10
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 5V
Supply Voltage-Min (Vsup) 4.5V
Load Capacitance 50pF
Number of Ports 2
Nominal Supply Current 20.5mA
Number of Bits 10
Propagation Delay 13 ns
Quiescent Current 5μA
Turn On Delay Time 1.5 ns
Family FCT
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 32mA 64mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.064 A
Prop. Delay@Nom-Sup 9 ns
Number of Input Lines 20
Independent Circuits 2
Length 18.415mm
Width 7.49mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

CY74FCT16841ATPVCT Overview


There is an embedded version of it in package 56-BSSOP (0.295, 7.50mm Width). A Tape & Reel (TR) package is used to package it. There is a Tri-State output configured. There is D-Type Transparent Latch logic type for this electrical device. Mounting this electronic component follows the Surface Mount method. The supply voltage of the device is 4.5V~5.5V. There is a temperature of -40°C~85°C at which the system operates. The 74FCT series is associated with this FPGA. There are 10 bits in this electronic part. As far as this device is concerned, it has no terminations. It is a member of the 74FCT16841 family. The supply voltage of the device is 5V. The device is equipped with 56 pins. There is a device in this electronic family called FCT. The pin configuration of the device is 56. The electronic part is mounted in a way that corresponds to Surface Mount. This device has 2 ports on board, which are all available at the same time. The part is in the FF/Latches subcategory. It reaches a maximum supply voltage (Vsup) of 5.5V. There are 5V power supplies attached to it. If the supply voltage (Vsup) is greater than 4.5V, then the device is working correctly. In the circuit, there are 20 input lines that are constituted by an electronic circuit. Based on its reliable performance, this device is suitable for TAPE AND REEL. There are no external factors that affect it, so it consumes 5μA quiescent current.

CY74FCT16841ATPVCT Features


56-BSSOP (0.295, 7.50mm Width) package
74FCT series
10 Bits
74FCT16841 family
56 pin count
56 pins
5V power supplies

CY74FCT16841ATPVCT Applications


There are a lot of Texas Instruments CY74FCT16841ATPVCT Latches applications.

  • Instrumentation
  • Hammer Device Information
  • Avionics
  • Parallel Input
  • Ring counter
  • Serial Input
  • Stacked or Push-Down Registers
  • Pseudo-random code generators
  • Shift left register
  • Digital bus buffer

Write a review

Note: HTML is not translated!
    Bad           Good