Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
56-BSSOP (0.295, 7.50mm Width) |
Number of Pins |
56 |
Weight |
694.790113mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74FCT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
56 |
Termination |
SMD/SMT |
Subcategory |
FF/Latches |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.635mm |
Base Part Number |
74FCT16841 |
Pin Count |
56 |
Output Type |
Tri-State |
Operating Supply Voltage |
5V |
Number of Elements |
2 |
Circuit |
10:10 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
20.5mA |
Output Current |
64mA |
Number of Bits |
20 |
Propagation Delay |
13 ns |
Quiescent Current |
500μA |
Turn On Delay Time |
1.5 ns |
Family |
FCT |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Current - Output High, Low |
32mA 64mA |
Logic Type |
D-Type Transparent Latch |
Max I(ol) |
0.064 A |
Prop. Delay@Nom-Sup |
5.5 ns |
Control Type |
ENABLE LOW/HIGH |
Number of Output Lines |
20 |
Translation |
N/A |
Height |
2.79mm |
Length |
18.41mm |
Width |
7.49mm |
Thickness |
2.59mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CY74FCT16841CTPVC Overview
The package in which it is embedded is named 56-BSSOP (0.295, 7.50mm Width). A Tube package is used to package it. It uses Tri-State as its output configuration. There is a logic type of D-Type Transparent Latch for this electrical device. A Surface Mount mount is used for mounting this electronic part. A 4.5V~5.5V voltage supply is required for operation. There is a temperature of -40°C~85°C at which the system operates. This FPGA is part of the 74FCT series. The design of this electronic part contains 20 bits. This device is designed with 56 terminations. As a member of the 74FCT16841 family, it falls under that category. In order to operate it, the supply voltage must be 5V. The device is equipped with 56 pins. There is a device in this electronic family called FCT. Designed with 56 pins, it is compatible with a wide range of devices. The electronic part is mounted using the Surface Mount method. In this device, there is a total of 2 ports available for use. This part is included in FF/Latches. 5V power supplies are needed to operate it. The 64mA output current gives it maximum design flexibility. For maximum efficiency, the supply voltage should be set to 5V. A binary equivalent of the input line is generated by the 20 output lines. It consumes 500μA of quiescent current without being affected by external factors. There are 2 elements in it.
CY74FCT16841CTPVC Features
56-BSSOP (0.295, 7.50mm Width) package
74FCT series
20 Bits
74FCT16841 family
56 pin count
56 pins
5V power supplies
2 elements
CY74FCT16841CTPVC Applications
There are a lot of Texas Instruments CY74FCT16841CTPVC Latches applications.
- Shift right register
- Synchronous frequency dividers
- Counting
- Pseudo-random code generators
- Meter applications
- Sample and hold register
- Buffer/Storage Registers
- Lamp and Display (LED)
- Parallel Input
- Pattern generators