Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SSOP (0.154, 3.90mm Width) |
Number of Pins |
20 |
Weight |
125.786834mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74FCT |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
20 |
Subcategory |
FF/Latches |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Voltage - Supply |
4.75V~5.25V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.635mm |
Base Part Number |
74FCT2373 |
Pin Count |
20 |
Output Type |
Tri-State |
Operating Supply Voltage |
5V |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
200μA |
Output Current |
12mA |
Number of Bits |
8 |
Propagation Delay |
5.2 ns |
Quiescent Current |
100μA |
Turn On Delay Time |
1.5 ns |
Family |
FCT |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE WITH SERIES RESISTOR |
Current - Output High, Low |
15mA 12mA |
Logic Type |
D-Type Transparent Latch |
Number of Input Lines |
8 |
Independent Circuits |
1 |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CY74FCT2373ATQCT Overview
The package in which it is embedded is named 20-SSOP (0.154, 3.90mm Width). Tape & Reel (TR) is the way it is packaged. There is a Tri-State output configured. A D-Type Transparent Latch logic type is used in this electrical device. The electronic component is mounted according to the Surface Mount method. A 4.75V~5.25V voltage supply is required for operation. A temperature of -40°C~85°C is used for operation. An FPGA of this type belongs to the 74FCT series. Electronic parts with 8 bits are designed for this application. The device consists of 20 terminations that are designed to be used in conjunction with it. It is a member of the 74FCT2373 family. The device works with a voltage of 5V for its supply voltage. There are 20 pins attached to it. It is part of the family of electronic devices called FCT. Designed with 20 pins, it is compatible with a wide range of devices. This electronic part is mounted in the way of Surface Mount. This device has 2 ports. This part can be found within the FF/Latches subcategory. 5V power supplies are needed to operate it. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. As a result of its reliable performance, it is well suited for TAPE AND REEL. Due to its 12mA output current, it offers maximum design flexibility. For maximum efficiency, the supply voltage should be set to 5V. It consumes 100μA of quiescent current without being affected by external factors.
CY74FCT2373ATQCT Features
20-SSOP (0.154, 3.90mm Width) package
74FCT series
8 Bits
74FCT2373 family
20 pin count
20 pins
5V power supplies
CY74FCT2373ATQCT Applications
There are a lot of Texas Instruments CY74FCT2373ATQCT Latches applications.
- Hammer Device Information
- Shift register
- Automotive ADAS
- Parallel Output
- Accumulator Registers
- A/D converters
- Programmable binary
- BCD counting
- Counter control
- OC-48 communication systems