CY74FCT2373ATQCTE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 20 |
| Weight | 125.786834mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT2373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 200μA |
| Output Current | 12mA |
| Number of Bits | 8 |
| Propagation Delay | 5.2 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 15mA 12mA |
| Logic Type | D-Type Transparent Latch |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT2373ATQCTE4 Overview
A package called 20-SSOP (0.154, 3.90mm Width) contains it. Tape & Reel (TR) is the way it is packaged. The output it is configured with uses Tri-State. In this electrical device, the logic type is D-Type Transparent Latch. Mounting this electronic component follows the Surface Mount method. The supply voltage of the device is 4.75V~5.25V. A temperature of -40°C~85°C is used for operation. The 74FCT series of FPGAs is the one this FPGA belongs to. It is designed with 8 bits. This device has been designed with 20 terminations available. The family in which it belongs to is 74FCT2373. It operates with a supply voltage of 5V. It has 20 pins that makes it easy to use. This electronic device is categorized as a FCT electronic device. The device has 20 pins. A Surface Mount mounting method has been used for this electronic part. In this device, there are 2 ports. This part can be found within the FF/Latches subcategory. During this period, the maximum supply voltage (Vsup) reaches 5.25V. The device is powered by 5V power supplies. If the supply voltage (Vsup) is greater than 4.75V, then the device is working correctly. The reliability of this device makes it well suited to TAPE AND REEL. With 12mA, maximum design flexibility is ensured. The binary equivalent of the input line is generated by 8 output lines. It consumes 100μA current from its quiescent state without being affected by external factors at all.
CY74FCT2373ATQCTE4 Features
20-SSOP (0.154, 3.90mm Width) package
74FCT series
8 Bits
74FCT2373 family
20 pin count
20 pins
5V power supplies
CY74FCT2373ATQCTE4 Applications
There are a lot of Texas Instruments CY74FCT2373ATQCTE4 Latches applications.
- Clocks
- Parallel data synchronization
- Hammer
- Counter
- Synchronous frequency dividers
- Bus system register with enable parallel lines at bus side
- Control circuits
- Multi-line decoders
- Automatic test equipment
- Buffer register
