CY74FCT2373ATQCTG4
| Parameters | |
|---|---|
| Nominal Supply Current | 200μA |
| Output Current | 12mA |
| Number of Bits | 8 |
| Propagation Delay | 5.2 ns |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 15mA 12mA |
| Logic Type | D-Type Transparent Latch |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 20 |
| Weight | 125.786834mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT2373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
CY74FCT2373ATQCTG4 Overview
There is an embedded version of it in package 20-SSOP (0.154, 3.90mm Width). A package of Tape & Reel (TR) has been used. There is a Tri-State output configured. The Logic type of this electrical device is D-Type Transparent Latch. Electronic parts are mounted in accordance with Surface Mount. A 4.75V~5.25V supply voltage is required to operate it. During operation, the temperature is set at -40°C~85°C. It is a type of FPGA belonging to the 74FCT series. With this electronic part, there are 8 bits. A device such as this has 20 terminations designed. There is no doubt that it belongs to the family 74FCT2373. The device works with a voltage of 5V for its supply voltage. The 20 pind are equipped with it. There is a device in this electronic family called FCT. 20 pins are used in its design. This electronic part is mounted in the way of Surface Mount. This device has 2 ports that can be connected to it. In the subcategory FF/Latches, this part belongs. 5.25V is the maximum supply voltage (Vsup). A total of 5V power supplies are required for it to operate. (Vsup) should be greater than 4.75V. On the basis of its reliability, this device is well suited for TAPE AND REEL. Its output current of 12mA ensures maximum design flexibility. 8 output lines generate the binary equivalent of the input lines.
CY74FCT2373ATQCTG4 Features
20-SSOP (0.154, 3.90mm Width) package
74FCT series
8 Bits
74FCT2373 family
20 pin count
20 pins
5V power supplies
CY74FCT2373ATQCTG4 Applications
There are a lot of Texas Instruments CY74FCT2373ATQCTG4 Latches applications.
- Timers
- Synchronous frequency dividers
- Meter applications
- Automotive Body Electronics
- Phase comparator
- Parallel-to-Serial Data Conversion
- Serial Output Data Queuing
- Automotive ADAS
- Serial Output Register
- Shift right register
