Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SSOP (0.154, 3.90mm Width) |
Number of Pins |
20 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74FCT |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
20 |
Subcategory |
FF/Latches |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Voltage - Supply |
4.75V~5.25V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.635mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74FCT2373 |
Pin Count |
20 |
Qualification Status |
Not Qualified |
Output Type |
Tri-State |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
5.25V |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4.75V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
200μA |
Output Current |
12mA |
Number of Bits |
8 |
Propagation Delay |
4.7 ns |
Quiescent Current |
100μA |
Turn On Delay Time |
1.5 ns |
Family |
FCT |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE WITH SERIES RESISTOR |
Current - Output High, Low |
15mA 12mA |
Logic Type |
D-Type Transparent Latch |
Independent Circuits |
1 |
Number of Output Lines |
8 |
Width |
3.9mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CY74FCT2373CTQCTE4 Overview
A package called 20-SSOP (0.154, 3.90mm Width) contains it. A package of Tape & Reel (TR) has been used. In this configuration, the output is set to Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. Based on the way of Surface Mount, this electronic part is mounted. A 4.75V~5.25V supply voltage is required to operate it. The operating temperature is -40°C~85°C. This FPGA is part of the 74FCT series. It is designed with 8 bits. The device consists of 20 terminations that are designed to be used in conjunction with it. It is a member of the 74FCT2373 family. In order to operate it, the supply voltage must be 5V. 20 pins are included. There is a device in this electronic family called FCT. Designed with 20 pins, it is compatible with a wide range of devices. Surface Mount is the method used for mounting this electronic part. In this device, there are 2 ports. The part is in the FF/Latches subcategory. The maximal supply voltage (Vsup) reaches 5.25V. A total of 5V power supplies are needed to run it. There should be a voltage supply (Vsup) greater than 4.75V. Considering the reliability of this device, it would be a good candidate for TAPE AND REEL. Its output current of 12mA ensures maximum design flexibility. Input lines are converted into binary equivalents by 8 output lines. It consumes 100μA of quiescent current without being affected by outside factors.
CY74FCT2373CTQCTE4 Features
20-SSOP (0.154, 3.90mm Width) package
74FCT series
8 Bits
74FCT2373 family
20 pin count
20 pins
5V power supplies
CY74FCT2373CTQCTE4 Applications
There are a lot of Texas Instruments CY74FCT2373CTQCTE4 Latches applications.
- Ring counter
- Shift register
- Up-Down Johnson
- Pattern Generators
- Avionics
- Counter control
- Digital bus buffer
- Parallel Output
- Clocks
- Counter timers