CY74FCT2373CTSOC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT2373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 200μA |
| Output Current | 12mA |
| Number of Bits | 8 |
| Propagation Delay | 4.7 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 15mA 12mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 0.2mA |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT2373CTSOC Overview
The 20-SOIC (0.295, 7.50mm Width) package contains it. Tube is the way it is packaged. In this configuration, the output is set to Tri-State. D-Type Transparent Latch is the logic type of this electrical device. Mounting this electronic component follows the Surface Mount method. The supply voltage of the device is 4.75V~5.25V. A temperature of -40°C~85°C is set as the operating temperature. An FPGA in this series belongs to the 74FCT family. The design of this electronic part is based on 8 bits. As far as this device is concerned, it has no terminations. The family 74FCT2373 includes it. In order to operate it, the supply voltage must be 5V. 20 pins are included. FCT is the family of this electronic device. Designed with 20 pins, it is compatible with a wide range of devices. This electronic part is mounted in the way of Surface Mount. This device is equipped with 2 ports. It belongs to the subcategory of FF/Latches. A total of 5V power supplies are required for it to operate. It features maximum flexibility in design due to 12mA output current. For maximum efficiency, the supply voltage should be set to 5V. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. The current consumed by the device is 100μA volts in quiescent mode, which cannot be affected by external factors. In total, it has 1 elements. Its maximum current supply (ICC) reaches 0.2mA.
CY74FCT2373CTSOC Features
20-SOIC (0.295, 7.50mm Width) package
74FCT series
8 Bits
74FCT2373 family
20 pin count
20 pins
5V power supplies
1 elements
CY74FCT2373CTSOC Applications
There are a lot of Texas Instruments CY74FCT2373CTSOC Latches applications.
- OC-48 communication systems
- Avionics
- Accumulator Registers
- Serial Input
- Programmable binary
- Automotive Cluster
- Meter applications
- Counter timers
- Buffer/Storage Registers
- Automotive ADAS
