banner_page

CY74FCT2373TQCT

D-Type, Latch 4.75V~5.25V 8 Bits Tri-State Latches 74FCT Series 74FCT2373 20 Pins DUAL CMOS 20-SSOP (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-CY74FCT2373TQCT
  • Package: 20-SSOP (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 169
  • Description: D-Type, Latch 4.75V~5.25V 8 Bits Tri-State Latches 74FCT Series 74FCT2373 20 Pins DUAL CMOS 20-SSOP (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Terminal Form GULL WING
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.635mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number 74FCT2373
Pin Count 20
Qualification Status Not Qualified
Output Type Tri-State
Circuit 8:8
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 5.25V
Power Supplies 5V
Supply Voltage-Min (Vsup) 4.75V
Load Capacitance 50pF
Number of Ports 2
Nominal Supply Current 200μA
Number of Bits 8
Propagation Delay 8 ns
Quiescent Current 100μA
Turn On Delay Time 1.5 ns
Family FCT
Logic Function D-Type, Latch
Output Characteristics 3-STATE WITH SERIES RESISTOR
Current - Output High, Low 15mA 12mA
Logic Type D-Type Transparent Latch
Independent Circuits 1
Number of Output Lines 8
Width 3.9mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SSOP (0.154, 3.90mm Width)
Number of Pins 20
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series 74FCT
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 20
Subcategory FF/Latches
Packing Method TAPE AND REEL
Technology CMOS
Voltage - Supply 4.75V~5.25V
Terminal Position DUAL

CY74FCT2373TQCT Overview


It is embedded in the 20-SSOP (0.154, 3.90mm Width) package. As a result, it has a packaging of Tape & Reel (TR). It is configured with an output of Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. Based on the way of Surface Mount, this electronic part is mounted. With a supply voltage of 4.75V~5.25V, it operates. There is -40°C~85°C operating temperature. This FPGA is part of the 74FCT series. Electronic parts with 8 bits are designed for this application. The device consists of 20 terminations that are designed to be used in conjunction with it. 74FCT2373 is the family name of it. The device works with a voltage of 5V for its supply voltage. 20 pins are available on it. This electronic device is categorized as a FCT electronic device. With the design of the board, there are only 20 pins. The electronic part is mounted in a way that corresponds to Surface Mount. In this device, there is a total of 2 ports available for use. It belongs to the subcategory of FF/Latches. It is possible to reach 5.25V when the maximum supply voltage (Vsup) has been reached. There are 5V power supplies required for this machine to operate. It is recommended that the supply voltage (Vsup) be greater than 4.75V. On the basis of its reliability, this device is well suited for TAPE AND REEL. Input lines are converted into binary equivalents by 8 output lines. Aquiescent current is consumed by 100μA without being affected by external forces.

CY74FCT2373TQCT Features


20-SSOP (0.154, 3.90mm Width) package
74FCT series
8 Bits
74FCT2373 family
20 pin count
20 pins
5V power supplies

CY74FCT2373TQCT Applications


There are a lot of Texas Instruments CY74FCT2373TQCT Latches applications.

  • A/D converters
  • Automotive Infotainment
  • Double bus register system
  • Accumulator Registers
  • Shift left register
  • Registers
  • Counter control
  • Meter applications
  • Lamp and Display (LED)
  • Shift right with parallel loading

Write a review

Note: HTML is not translated!
    Bad           Good