CY74FCT2373TQCTE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT2373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 200μA |
| Number of Bits | 8 |
| Propagation Delay | 8 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 15mA 12mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT2373TQCTE4 Overview
There is an embedded version of it in package 20-SSOP (0.154, 3.90mm Width). A package of Tape & Reel (TR) has been used. It uses the output configuration Tri-State. This electrical device has the logic type D-Type Transparent Latch. Surface Mount is used to mount this electronic part. In order for it to operate, it needs a supply voltage of 4.75V~5.25V. The temperature at which the machine is operating is -40°C~85°C. An FPGA of this type belongs to the 74FCT series. The design of this electronic part is based on 8 bits. This device is designed with 20 terminations. 74FCT2373 is its family. The device works with a voltage of 5V for its supply voltage. It has 20 pins that makes it easy to use. This electronic device is categorized as a FCT electronic device. The 20 pins are designed into it. The electronic part is mounted using the Surface Mount method. In this device, there are 2 ports. FF/Latches is the subcategory of this part. It is possible to reach 5.25V when the maximum supply voltage (Vsup) has been reached. It operates from 5V power supplies. Ensure that the supply voltage (Vsup) is greater than 4.75V. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. The reliability of this device makes it well suited to TAPE AND REEL. Without external influences, it consumes 100μA quiescent current.
CY74FCT2373TQCTE4 Features
20-SSOP (0.154, 3.90mm Width) package
74FCT series
8 Bits
74FCT2373 family
20 pin count
20 pins
5V power supplies
CY74FCT2373TQCTE4 Applications
There are a lot of Texas Instruments CY74FCT2373TQCTE4 Latches applications.
- Up-Down Johnson
- Motor Drives
- Synchronous frequency dividers
- Counters
- Watches
- Registers
- Counter control
- Display
- Ring counter
- Parallel Output
