CY74FCT2374ATSOCT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT2374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 12mA |
| Number of Bits | 8 |
| Clock Frequency | 250MHz |
| Propagation Delay | 6.5 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 200μA |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 15mA 12mA |
| Max Propagation Delay @ V, Max CL | 6.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT2374ATSOCT Overview
20-SOIC (0.295, 7.50mm Width)is the way it is packaged. D flip flop is included in the Tape & Reel (TR)package. In the configuration, Tri-State, Non-Invertedis used as the output. Positive Edgeis the trigger it is configured with. There is an electronic component mounted in the way of Surface Mount. A voltage of 4.75V~5.25Vis used as the supply voltage. A temperature of -40°C~85°C TAis used in the operation. A flip flop of this type is classified as a D-Type. In this case, it is a type of FPGA belonging to the 74FCT series. A frequency of 250MHzshould be the maximum output frequency. The list contains 1 elements. Despite external influences, it consumes 200μAof quiescent current. 20terminations have occurred. The object belongs to the 74FCT2374 family. The D flip flop is powered by a voltage of 5V . JK flip flop input capacitance is 5pF farads. In terms of electronic devices, this device belongs to the FCTfamily of devices. There is an electronic part that is mounted in the way of Surface Mount. 20pins are included in its design. There is a clock edge trigger type of Positive Edgeon this device. The part is included in FF/Latches. An electronic part designed with 8bits is used in this application. Vsup reaches its maximum value at 5.25V. For normal operation, the supply voltage (Vsup) should be kept above 4.75V. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. An electrical current of 5V volts is applied to it. The flip flop has 2ports embedded within it. This T flip flop features a maximum design flexibility due to its output current of 12mA. In order for the chip to function, it has 8output lines.
CY74FCT2374ATSOCT Features
Tape & Reel (TR) package
74FCT series
20 pins
8 Bits
5V power supplies
CY74FCT2374ATSOCT Applications
There are a lot of Texas Instruments CY74FCT2374ATSOCT Flip Flops applications.
- Latch-up performance
- Bounce elimination switch
- Digital electronics systems
- Pattern generators
- Frequency Divider circuits
- Set-reset capability
- Synchronous counter
- Clock pulse
- Control circuits
- Matched Rise and Fall
