CY74FCT2374CTQCTG4
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT2374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 12mA |
| Number of Bits | 8 |
| Clock Frequency | 250MHz |
| Propagation Delay | 5.2 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 200μA |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 15mA 12mA |
| Max Propagation Delay @ V, Max CL | 5.2ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
CY74FCT2374CTQCTG4 Overview
20-SSOP (0.154, 3.90mm Width)is the packaging method. The package Tape & Reel (TR)contains it. This output is configured with Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.75V~5.25V. A temperature of -40°C~85°C TAis considered to be the operating temperature. A flip flop of this type is classified as a D-Type. JK flip flop belongs to the 74FCTseries of FPGAs. This D flip flop should not have a frequency greater than 250MHz. In total, it contains 1 elements. It consumes 200μA of quiescent A total of 20 terminations have been made. JK flip flop belongs to 74FCT2374 family. Power is provided by a 5V supply. This T flip flop has a capacitance of 5pF farads at the input. A device of this type belongs to the family of FCT. There is an electronic part that is mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. This device's clock edge trigger type is Positive Edge. This device has the base part number FF/Latches. It is designed with 8bits. As soon as Vsup reaches 5.25V, the maximum supply voltage is reached. Normally, the supply voltage (Vsup) should be above 4.75V. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. In order for the device to operate, it requires 5V power supplies. The D flip flop is embedded with 2ports. The output current of 12mA makes it feature maximum design flexibility. The JK flip flop is with 8 output lines to operate.
CY74FCT2374CTQCTG4 Features
Tape & Reel (TR) package
74FCT series
20 pins
8 Bits
5V power supplies
CY74FCT2374CTQCTG4 Applications
There are a lot of Texas Instruments CY74FCT2374CTQCTG4 Flip Flops applications.
- Registers
- Supports Live Insertion
- Count Modes
- Matched Rise and Fall
- QML qualified product
- Latch-up performance
- CMOS Process
- Buffered Clock
- Modulo – n – counter
- Storage Registers
