CY74FCT2374CTSOCE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74FCT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT2374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 12mA |
| Number of Bits | 8 |
| Clock Frequency | 250MHz |
| Propagation Delay | 5.2 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 200μA |
| Current - Output High, Low | 15mA 12mA |
| Max Propagation Delay @ V, Max CL | 5.2ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 8 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT2374CTSOCE4 Overview
It is packaged in the way of 20-SOIC (0.295, 7.50mm Width). A package named Tubeincludes it. It is configured with Tri-State, Non-Invertedas an output. Positive Edgeis the trigger it is configured with. This electronic part is mounted in the way of Surface Mount. The supply voltage is set to 4.75V~5.25V. The operating temperature is -40°C~85°C TA. D-Typeis the type of this D latch. In this case, it is a type of FPGA belonging to the 74FCT series. You should not exceed 250MHzin the output frequency of the device. The element count is 1 . It consumes 200μA of quiescent current without being affected by external factors. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. You can search similar parts based on 74FCT2374. A voltage of 5V is used to power it. Its input capacitance is 5pFfarads. The electronic device belongs to the FCTfamily. There is an electronic part mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. This device's clock edge trigger type is Positive Edge. It is part of the FF/Latchesbase part number family. There are 8bits in this flip flop. Vsup reaches its maximum value at 5.25V. It is imperative that the supply voltage (Vsup) is maintained above 4.75Vin order to ensure normal operation. In order for the device to operate, it requires 5V power supplies. The D flip flop has no ports embedded. With an output current of 12mA, it is possible to design the device in any way you want. It has 3 output lines to operate. This input has 8lines.
CY74FCT2374CTSOCE4 Features
Tube package
74FCT series
20 pins
8 Bits
5V power supplies
CY74FCT2374CTSOCE4 Applications
There are a lot of Texas Instruments CY74FCT2374CTSOCE4 Flip Flops applications.
- Instrumentation
- Functionally equivalent to the MC10/100EL29
- Latch
- Guaranteed simultaneous switching noise level
- Balanced 24 mA output drivers
- Reduced system switching noise
- Storage registers
- Safety Clamp
- Synchronous counter
- Buffer registers
