CY74FCT2374TSOC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74FCT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT2374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 250MHz |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 200μA |
| Current - Output High, Low | 15mA 12mA |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 8 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT2374TSOC Overview
In the form of 20-SOIC (0.295, 7.50mm Width), it has been packaged. D flip flop is included in the Tubepackage. Currently, the output is configured to use Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. Surface Mountis positioned in the way of this electronic part. A supply voltage of 4.75V~5.25V is required for operation. It is at -40°C~85°C TAdegrees Celsius that the system is operating. It is an electronic flip flop with the type D-Type. It is a type of FPGA belonging to the 74FCT series. It should not exceed 250MHzin terms of its output frequency. D latch consists of 1 elements. It consumes 200μA of quiescent 20terminations have occurred. The 74FCT2374 family contains it. Power is provided by a 5V supply. This T flip flop has a capacitance of 5pF farads at the input. In this case, the D flip flop belongs to the FCTfamily. Surface Mount mounts this electronic component. It is designed with 20 pins. Its clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. The design is based on 8bits. It reaches 5.25Vwhen the supply voltage is maximal (Vsup). The supply voltage (Vsup) should be maintained above 4.75V for normal operation. There are 5V power supplies attached to it. A total of 2ports are embedded in the D flip flop. In order to operate, the chip has 3 output lines. As of now, there are 8input lines.
CY74FCT2374TSOC Features
Tube package
74FCT series
20 pins
8 Bits
5V power supplies
CY74FCT2374TSOC Applications
There are a lot of Texas Instruments CY74FCT2374TSOC Flip Flops applications.
- Matched Rise and Fall
- Latch
- ESCC
- Bounce elimination switch
- Computing
- QML qualified product
- Consumer
- Dynamic threshold performance
- Memory
- Buffer registers
